627038
5
Zoom out
Zoom in
Previous page
1/16
Next page
5
CHANG E S AND T YPI N G ERRORS RESERVED
CHANG E S AND T YPI N G ERRORS RESERVED
CHANG E S AND T YPI N G ERRORS RESERVED
4. feaTUres
Model HU 20 Super HU 20F Super
Drilling capacity 20 mm 20 mm
Spindle taper MT2 MT2
Distance spindle column 180 mm 180 mm
Drilling depth 80 mm 80 mm
Speed range 210-2500 rpm (10) 210-2500 rpm (10)
Max. distance spindle-table 435 mm 770 mm
Column diameter 80 mm 80 mm
Table dimensions 280 x 280 mm 280 x 280 mm
Motor power 0.75 kW 0.75 kW
Weight 80 kg 92 kg
Voltage 400 V 400 V
5. insTalling The machine
Install the machine on a concrete floor. Consider existing and anticipated needs, the size of material to be processed
through each machine, and space for auxiliary stands, work tables or other machinery when establishing a location
for your machine. See figures below.
1-5Site Considerations
Working Clearances
Consider existing and anticipated needs, size of material to be processed through each machine, and
space for auxiliary stands, work tables or other machinery when establishing a location for your
machine. See Figure 01.
for the minimum working clearances of the Model JTD-16series
A
620mm
B
390mm
1-6Items Needed for Set Up
1.Column and Base
The column must be secured on the base toproperly assemble your drill press.
To secure the column to the base:
1. Place the column on the base and align themounting holes.
2. Secure the column to the base with the fourhex bolts, as shown in Figure 02
4
Figure 01
Figure 02
4.Slide the arbor into the spindle socket whileslowly rotating the drill chuck. The socket hasa
rectangular pocket where the tang (or flatportion of the arbor shown in Figure 21) fitsinto.
5.Seat the chuck with a rubber mallet, as shownin Figure 22.
1-8.Setting the machine instruction:
1.The machine base with setting hole will be set on concrete floor.
The outlined procedures of setting the machine
MODEL
AREA
SETTED SCREW
JTD-16 series
X=800×600
M10
2
.The dimension of setting hole:
JTD-16series
10
Figure 21
Figure 22
Wood
Tang-SideUp
HU 20 Super: X = 770x580 mm
Use M10 set screws
HU 20F Super: X = 800x650 mm
Use M12 set screws
Figure 3
Figure 2
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Huvema HU 20F SUPER at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Huvema HU 20F SUPER in the language / languages: English as an attachment in your email.

The manual is 2,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Huvema HU 20F SUPER

Huvema HU 20F SUPER User Manual - German - 16 pages

Huvema HU 20F SUPER User Manual - Dutch - 16 pages

Huvema HU 20F SUPER User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info