627038
4
Zoom out
Zoom in
Previous page
1/16
Next page
4
CHANG E S AND T YPI N G ERRORS RESERVED
CHANG E S AND T YPI N G ERRORS RESERVED CHANG E S AND T YPI N G ERRORS RESERVED
2. aDDiTional safeTy rUles
Always keep in mind that:
the machine must be switched off and disconnected from the power supply during maintenance and repairs,
clamped workpieces may only be measured when the machine is switched off.
Never lean over the machine, mind loose clothing, ties, jewellery etc. and wear a cap.
Do not remove safety devices or guards. Never use the machine while a guard is open.
Always use safety glasses for machining rough materials.
Burrs and chips should only be removed using a sweeper or other aid, never with your bare hands!
Never leave the machine running unattended.
3. Unpacking
Before unpacking, make sure the packaging is not damaged, broken or parts of the machine are sticking out; if any
of these defects are found, contact your retailer as soon as possible.
Carefully open the packaging (pull it from the bottom to the top).
Take out and read the manual; check if the machine is complete.
Check if the machine is in good condition. There should be no damage, cracks or rust.
Clean the surface of the machine.
3.1 TransporTaTion insTrUcTion
Please refer to the machines specifications for proper machine handling. Be sure to use a suitable forklift or hoist
for lifting the machine.
Handling and transportation must be carried out by qualified personnel.
A forklift or hoist must be operated by a qualified driver.
During transaport, always keep the machine well balanced.
The machine must be lifted only vertically.
Before handling, make sure all moving parts are secured and all detacheable accessories are removed from the
machine.
Make sure the lifting straps are strong enough to hold the machine.
Make sure the machine cannot bump or crash into anything. This will influence machine precision and may
damage the electronic control.
Always wear safety glasses!
Typical lifting strap position.
1-3. Setting the machine instruction:
1.The machine base with setting hole will be set on concrete floor.
The outlined procedures of setting the machine
MODEL
SETTED SCREW
JS-834
M12
JS-834V
M12
JS-840VB
M12
2.The dimension of setting hole:
Consider existing and anticipated needs, size of material to be processed through each machine, and
space for auxiliary stands, work tables or other machinery when establishing a location for your
machine. See Figure 01.
JS-834/834V/840VBDimensions(m/m)
JS-834/834V
A=1000
B=560
JS-840VB
A=1050
B=580
2
Lifting Straps
Figure 01
Figure 1
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Huvema HU 20F SUPER at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Huvema HU 20F SUPER in the language / languages: English as an attachment in your email.

The manual is 2,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Huvema HU 20F SUPER

Huvema HU 20F SUPER User Manual - German - 16 pages

Huvema HU 20F SUPER User Manual - Dutch - 16 pages

Huvema HU 20F SUPER User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info