477593
40
Zoom out
Zoom in
Previous page
1/68
Next page
40
NOTA!
La máquina tiene un interruptor de seguridad que corta la
corriente al motor si el conductor sale del asiento con el
motor en marcha y con la palanca de acoplamiento/
desacoplamiento en la posición de acoplamiento.
NOTA!
La macchina è dotata di interruttore di sicurezza che
interrom pe l’alimentazione di corrente al motore quando
l’operatore lascia il sedile con il motore acceso e il
tagliaerba inserito.
N.B.!
De machine is uitgerust met een veiligheidsschakelaar,
die onmiddellijk de stroom naar de motor verbreekt,
wanneer de bestuurder zijn plaats verlaat, terwijl de
motor loopt en de aan/uitschakelhendel op “ingeschakeld”
staat.
NOTE!
The machine is equipped with a safety switch which
immediately breaks the current to the engine if the driver
leaves the seat with engine running and with the connec-
tion/disconnection lever in position “connection”.
HINWEIS!
Die Maschine ist mit einem Sicherheitsschalter
ausgerüstet, der den Strom zum Motor sofort unterbricht,
wenn der Fahrer den Sitz bei laufendem Motor verläßt, und
dabei der Schalthebel für das Mähaggregat auf
“eingeschaltet” steht.
REMARQUE!
La machine est équipée d’un interrupteur de sécurité qui
arrête immédiatement le moteur si celui-ci tourne encore
lorsque le conducteur quitte son siège.
55
55
5
Eng
F
Esp
NL
“OFF”
“SET”
To Move Forward and Backward
The direction and speed of movement is controlled by the
forward and reverse drive pedals.
Start tractor and release parking brake.
Slowly depress forward or reverse drive pedal to begin
movement. Ground speed increases the further down
the pedal is depressed.
Eng
To Use Cruise Control
The cruise control feature can be used for forward travel only.
With forward drive pedal depressed to desired speed,
move cruise control lever forward to “SET” position and
hold while lifting your foot off the pedal, then release the
cruise control lever.
To disengage the cruise control, pull the lever backward
to “OFF” position, or fully depress the brake pedal.
Cutting
Lower the cutting unit by moving the lift lever forward and
connect the cutting unit. Choose a driving speed which suits
the terrain and required cutting results.
Vorwärts- und Rückwärtsbewegung
Bewegungsrichtung und –geschwindigkeit werden durch
die Pedale für Vorwärts- und Rückwärtsantrieb gesteuert.
Traktor starten und Feststellbremse lösen.
Das Pedal für den Vorwärts- oder Rückwärtsantrieb
langsam niederdrücken, um die Bewegung zu beginnen.
Die Grundgeschwindigkeit nimmt zu, je weiter das Pedal
nach unten gedrückt wird.
Verwendung der Geschwindigkeitsregelung
Die Einrichtung für die Geschwindigkeitsregelung kann nur
für das Vorwärtsfahren verwendet werden.
Das Pedal für Vorwärtsantrieb betätigen, bis die
gewünschte Geschwindigkeit erreicht wird; dann den
Hebel für die Geschwindigkeitsregelung nach vorwärts
in die Position „SET“ bringen und halten, während Sie
den Fuß vom Pedal nehmen; danach den
Geschwindigkeitsregelungshebel loslassen.
Zur Deaktivierung der Geschwindigkeitsregelung den
Hebel nach rückwärts auf die Position “OFF” bringen
oder das Bremspedal ganz niederdrücken.
Schneidetätigkeit
Die Schneideeinheit herabsenken, indem der
Bedienungshebel nach vorwärts bewegt und die
Schneideeinheit angeschlossen wird. Wählen Sie eine
Betriebsgeschwindigkeit, die dem Gelände und den
gewünschten Schneideergebnissen entspricht.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna YTH200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna YTH200 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info