518136
60
Zoom out
Zoom in
Previous page
1/64
Next page
58
Care of Your Platinum
Trouble Shooting
Any Time you experience
a problem when sewing:
Insert new needle.
Rethread the top and bobbin threads.
Use different spool pin positions
(vertical or horizontal).
Use thread nets and quality thread. We
recommend the same sewing thread on
top and bobbin for general sewing. For
decorative sewing we recommend Rayon
embroidery thread on top and sewing
thread on bobbin. For embroidery we
recommend Rayon embroidery thread
on top and embroidery bobbin thread on
bobbin
Fabric puckers?
Check needle, it could be damaged.
The thread tension is too tight. Adjust
the thread tension.
Use the presser foot recommended on
the InfoDisplay.
Rethread top and bobbin threads.
Use quality thread.
Shorten stitch length.
• Use stabilizer.
Skipped stitches?
Check needle, it could be damaged.
Be sure the needle is inserted correctly
and all the way into the clamp.
Rethread top and bobbin threads.
Use recommended presser foot.
Turn machine off and on to reset.
Consult your dealer for service.
Needle breaks?
Use care not to pull fabric when sewing.
Insert needle correctly, see page 12.
Fabric does not move?
Raise feed teeth.
Increase stitch length.
Poor Tension?
Rethread top and bobbin - use quality
thread.
Insert new needle size.
Adjust the thread tension with the thread
tension buttons.
Upper Thread Breaks?
Does thread feed smoothly/not
catching?
Use thread nets and quality thread.
New needle size and type
Rethread top and bobbin threads - check
for correct threading.
Try different spool pin positions (hori-
zontal or vertical).
If stitch plate hole is damaged, replace
stitch plate.
Is the correct spool holder used in front
of the thread?
Bobbin thread breaks?
Wind a new bobbin.
Replace the bobbin in the machine, check
correct threading, page 10.
If stitch plate hole is damaged - replace
stitch plate.
Clean bobbin area.
Bobbin winds irregularly?
Check threading for bobbin winding.
Wrong stitch, irregular
or narrow stitches?
Turn machine off and on to reset.
Change needle, rethread top and bobbin
threads.
• Use stabilizer.
Machine sews slowly?
• Check speed.
Remove stitch plate and brush lint from
bobbin and feed teeth area.
Have the machine serviced at your dealer.
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Platinum 955E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Platinum 955E in the language / languages: English as an attachment in your email.

The manual is 7,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Platinum 955E

Husqvarna Platinum 955E User Manual - German - 64 pages

Husqvarna Platinum 955E User Manual - Dutch - 64 pages

Husqvarna Platinum 955E User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info