510456

Husqvarna H-CLASS E10 Manual

30
Zoom out
Zoom in
Previous page
1/32
Next page
30
TROUBLE SHOOTING GUIDE
Problem Cause Correction
Upper thread
breaks
1. The machine is not threaded correctly.
2. The thread tension is too tight.
3. The thread is too thick for the needle.
4. The needle is not inserted correctly.
5. The thread is wound around the spool
holder pin.
6. The needle is damaged.
1. Rethread the machine.
2. Reduce the thread tension. (lower
number)
3. Select a larger needle.
4. Remove and reinsert the needle. (À at
side towards the back)
5. Remove the spool and wind thread
onto spool.
6. Replace the needle.
Lower thread
breaks
1. The bobbin case is not inserted
correctly.
2. The bobbin case is threaded wrong.
3. The lower thread tension is too tight.
1. Remove and reinsert the bobbin case
and pull on the thread. The thread should
pull easily.
2. Check both bobbin and bobbin case.
3. Loosen lower thread tension as
described.
Skipped stitches 1. The needle is not inserted correctly.
2. The needle is damaged.
3. The wrong size or type of needle has
been used.
4. The foot is not attached correctly.
1. Remove and reinsert needle. (À at side
towards the back)
2. Insert a new needle.
3. Choose a needle to suit the thread and
fabric.
4. Check and attach correctly.
Needle breaks 1. The needle is damaged.
2. The needle is not correctly inserted.
3. Wrong needle size for the fabric.
4. The wrong foot is attached.
1. Insert a new needle
2. Insert the needle correctly. (À at side
towards the back)
3. Choose a needle to suit the thread and
fabric.
4. Select the correct foot.
Loose stitches 1. The machine is not correctly threaded.
2. The bobbin case is not correctly
threaded.
3. Needle/ fabric/ thread combination is
wrong.
4. Thread tension wrong.
1. Check the threading.
2. Thread the bobbin case as illustrated.
3. The needle size must suit the fabric
and thread.
4. Correct the thread tension.
Seams gather
or pucker
1. The needle is too thick for the fabric.
2. The stitch length is incorrectly adjusted.
3. The thread tension is too tight.
1. Select a ¿ ner needle.
2. Shorten the stitch length.
3. Loosen the thread tension.
Uneven stitches,
uneven feed
1. Poor quality thread.
2. The bobbin case is incorrectly
threaded.
3. Fabric has been pulled.
1. Select a better quality thread.
2. Remove bobbin case, thread and insert
correctly.
3. Do not pull on the fabric while sewing,
let it be moved up by the feed dogs.
… 30


Need help? Post your question in this forum.

Forumrules
1

Forum

husqvarna-h-class-e10

Reset search

  • My dog feed does not appear high enough. How do I adjust this. My stitching on the machine is to small even when it's set at 4 stitch length on my machine.
    I already cleaned the dogfeed.
    Thanks Submitted on 14-5-2022 at 21:42

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna H-CLASS E10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna H-CLASS E10 in the language / languages: English as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna H-CLASS E10

Husqvarna H-CLASS E10 User Manual - German - 32 pages

Husqvarna H-CLASS E10 User Manual - Dutch - 32 pages

Husqvarna H-CLASS E10 User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info