Manual Husqvarna H-CLASS E10 (page 29 of 32) (English)

510456

Zoom out

Zoom in

1/32

Attention:

Disconnect the machine from the

electricity supply by removing the

plug from the main socket. When

cleaning the machine, it must

always be disconnected from the

electricity supply.

Remove the stitch plate

Turn the handwheel until the needle

is fully raised. Open the hinged front

cover and unscrew the needle plate

screw withe the screw driver.(1)

Cleaning the feed dog

Remove the bobbin case and use

the brush supplied to clean the whole

area.(2)

Cleaning and lubricating the hook (3)

Remove the bobbin case. Snap the

two hook retaining arms (a) outwards.

Remove the hook race cover (b) and

the hook (c) and clean with a soft

cloth. Lubricate at the points (d) (1-2

drops) with sewing machine oil. Turn

the handwheel until the hook race

(e) is in the left position. Replace

the hook (c). Replace the hook race

cover and snap back the two hook

retaining arms. Insert he bobbin case

and bobbin and replace the stitch

plate.

Important:

Fabric lint and threads must be

removed regularly.

Your machine should be serviced

at regular intervals at your local

dealer.

MAINTENANCE

My dog feed does not appear high enough. How do I adjust this. My stitching on the machine is to small even when it's set at 4 stitch length on my machine.
I already cleaned the dogfeed.
Thanks Submitted on 14-5-2022 at 21:42
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna H-CLASS E10 in the language / languages: English as an attachment in your email.

The manual is 0,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna H-CLASS E10

Husqvarna H-CLASS E10 User Manual - German - 32 pages

Husqvarna H-CLASS E10 User Manual - Dutch - 32 pages

Husqvarna H-CLASS E10 User Manual - French - 32 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna H-CLASS E10 Manual

Product: