477589
70
Zoom out
Zoom in
Previous page
1/96
Next page
70
6
M
K
L
P
Q
Q
R
S
P
R
To Replace Mower Drive Belt
MOWER DRIVE BELT REMOVAL
1. Park tractor on a level surface. En gage parking brake.
2. Lower attachment lift lever to its lowest position.
3. Disengage belt tension rod (K) from lock bracket (L).
CAUTION: Belt tension rod is spring loaded. Have a firm grip
on rod and release slowly.
4. Remove screws (P) from mandrel covers (Q) and remove
covers.
5. Remove any dirt or grass clippings which may have
accumulated around mandrels and entire upper deck
surface.
6. Remove belt from electric clutch pulley (M), both mandrel
pulleys (R) and all idler pulleys (V).
MOWER DRIVE BELT INSTALLATION
1. Install belt around both mandrel pulleys (R) and around
idler pulleys (V) as shown.
2. Install belt onto electric clutch pulley (M).
IMPORTANT: Check belt for proper routing in all mower
pulley grooves.
3. Reassemble mandrel covers (Q). Securely tighten all
screws.
4. Engage belt tension rod (K) on locking bracket (L).
CAUTION: Belt tension rod is spring loaded. Have a tight grip
on rod and engage slowly.
5. Raise attachment lift lever to highest position.
Austauschen des Antriebsriemens des Mähers
ENTFERNEN DES ANTRIEBSRIEMENS DES MÄHERS
1. Parken Sie den Traktor auf einer ebenen Fläche. Legen
Sie die Handbremse ein.
2. Drücken Sie den Hebel für den Anhängerlift auf seine
niedrigste Stellung.
3. Lösen Sie den Riemenspannstab (K) vom Sperrbügel (L).
VORSICHT: Der Riemen ist mit einer Feder gespannt. Halten
Sie den Stab fest in der Hand und lassen Sie ihn langsam los.
4. Entfernen Sie die Schrauben (P) von den Wellenabdeck-
ungen (Q) und nehmen Sie die Abdeckungen ab.
5. Entfernen Sie Schmutz oder Grasreste, die sich vielleicht
rund um die Wellen und auf der ganzen Fläche des
Oberdecks angesammelt haben.
6. Nehmen Sie den Riemen von der elektrischen Kup-
plungsscheibe (M), den beiden Wellenscheiben (R) und
von allen Freilaufscheiben (V) ab.
INSTALLIEREN DES ANTRIEBSRIEMENS DES MÄ-
HERS
1. Legen Sie den Riemen rund um die beiden Wellenscheiben
(R) und um die Freilaufscheiben (V) wie abgebildet.
2. Nun legen Sie den Riemen um die elektrische Kup-
plungsscheibe (M).
WICHTIG: Prüfen Sie den richtigen Verlauf des Riemens in
allen Triebradrinnen des Mähers.
3. Montieren Sie die Wellenabdeckungen (Q) wieder an.
Ziehen Sie alle Schrauben gut fest.
4. Schieben Sie den Riemenspannstab (K) in den Sperrbügel
(L) ein.
VORSICHT: Der Riemen ist mit einer Feder gespannt. Halten
Sie den Stab fest in der Hand und schieben Sie ihn langsam ein.
5. Heben Sie den Anhängerlifthebel auf seine höchste Stellung.
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna GTH264T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna GTH264T in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 5,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info