477562
53
Zoom out
Zoom in
Previous page
1/100
Next page
53
5
To Move Forward and Backward
The direction and speed of movement is controlled by the
forward and reverse drive pedals.
Start tractor and release parking brake.
Slowly depress forward or reverse drive pedal to begin
movement. Ground speed increases the further down the
pedal is depressed.
Cutting
Lower the cutting unit by moving the lift lever forward and
connect the cutting unit. Choose a driving speed which suits
the terrain and required cutting results.
Vorwärts- und Rückwärtsbewegung
Bewegungsrichtung und geschwindigkeit werden durch die
Pedale für Vorwärts und Rückwärtsantrieb gesteuert.
Traktor starten und Feststellbremse lösen.
• Das Pedal für den Vorwärts oder Rückwärtsantrieb
langsam niederdrücken, um die Bewegung zu beginnen.
Die Grundgeschwindigkeit nimmt zu, je weiter das Pedal
nach unten gedrückt wird.
Schneidetätigkeit
Die Schneideeinheit herabsenken, indem der Bedienung-
shebel nach vorwärts bewegt und die Schneideeinheit ang-
eschlossen wird. Wählen Sie eine Betriebsgeschwindigkeit,
die dem Gelände und den gewünschten Schneideergebnis-
sen entspricht.
Pour avancer et pour reculer
La direction et la vitesse du déplacement sont contrôlées par
les pédales de marche avant et de marche arrière.
Démarrer le tracteur et relâcher le frein de stationnement.
Appuyer doucement sur la pédale de marche avant, ou
sur celle de marche arrière, pour que le tracteur com-
mence à se déplacer. Plus la pédale est enfoncée, plus
la vitesse augmente.
Coupe
Abaissser le carter de coupe en repoussant le levier de
commande de relevage vers l'avant et embrayer le carter de
coupe. Choisir la vitesse d'avancement en fonction du ter rain
et de la qualité de coupe désirée.
Per avanzare e retrocedere
La direzione e la velocità di movimento sono controllate azi-
onando i pedali di avanzamento e di retromarcia.
Avviare il trattore e rilasciare il freno di stazionamento.
Premere lentamente il pedale di avanzamento o di ret-
romarcia per avviare il movimento. La velocità al suolo
aumenta ma mano che si preme il pedale.
Taglio
Abbassare l’unità di taglio spostando in avanti la leva di sol-
levamento e collegare l’unità di taglio. Selezionare la velocità
di marcia più idonea al terreno ed al tipo di taglio richiesto.
Moverse hacia adelante y hacia atrás
La dirección y la velocidad de movimientos están controlados
por los pedales de marcha adelante y atrás.
Poner en marcha el tractor y quitar el freno de mano.
Apretar lentamente el pedal marcha adelante y atrás para
iniciar el movimiento. Más se aprieta el pedal y mayor es
la velocidad.
Cortar
Bajar la unidad de corte moviendo la palanca de elevación
hacia adelante y conectar la unidad de corte. Elegir una veloci-
dad adecuada al terreno y al resultado que se quiere obtener.
Vooruitrijden en Achteruitrijden
De richting en snelheid tijdens het rijden wordt bepaald door
de vooruitrij en acheruitrijpedalen.
Start de traktor en haal de parkeerrem eraf.
Druk voorzichtig op het vooruitrij of achteruitrijpedaal om
te gaan rijden. De snelheid neemt toe als het pedaal meer
wordt ingedrukt.
Maaien
Zet het maaionderdeel lager door de tilhendel naar voren te
bewegen en bevestig het maaionderdeel. Kies een rijsnelheid
die bij het terrein en de gewenste maairesultaten past.
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna CTH194 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna CTH194 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 10,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info