Manual Hunter ACC (page 36 of 100) (English)

685907

Zoom out

Zoom in

1/100

If the station passes (runs within the Limit), the controller

will Pause the station, and move on to test the next station

that had been running (if applicable).

If the station fails, (runs outside of the Limit), the station’s

run time will be ended, and an alarm message will be

placed in the Alarm Log.

The display will show ATTENTION: Flow Alarm if any

stations have failed the test. Irrigation (for passing

stations) continues to run normally, even if this display is

present.

Details for the stations that failed, including time of day

and Over or Underflow, will be stored in the Alarm Log

(Data History dial position).

To get detailed information about any Attention display,

turn the dial to Data History and select the Alarm Log.

After irrigation is completed, the display will continue to

show that alarms occurred, until any button is pressed.

This will usually result in multiple flow alarms since ACC

will try to restart stations after Pausing for one minute.

Since ACC can run multiple stations at once (Overlap,

SSGs, etc.), it will add up the learned flows for all stations

that are running, and compare the total to the actual flow,

in real time. If an alarm occurs with multiple stations, ACC

will enter a diagnostic mode to try to isolate the problem

stations.

All station delays must be met before the alarm will occur.

If multiple stations are running and have different delay

times set for Flow Alarm limits, the longest delay must be

met before the alarm will occur.

To view the diagnostics while they are in progress, press

the Information button. This will clear the Attention, Flow

Alarm display and show the actual status of the affected

stations. While isolation is in progress, the display will

then show individual stations in Pause status, as each

station’s flow is sampled one at a time.

ALARM LOGS

See Data History on page 38 for more information.

When a Flow Alarm is shown on the display, turn the dial

to Data History to view the Alarm Logs for an explanation

of the alarm (select Alarm Logs and press +).

The Last Event is always shown first. Press the – button to

step backwards through the logs to view them one at a time.

A Missed Irrigation report will be logged for each station

event that causes a station to shut down for Overflow or

Underflow reasons. The report will show the date and time

of the event, and which type of flow alarm occurred (Over

or Under).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hunter ACC in the language / languages: English as an attachment in your email.

The manual is 7,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hunter ACC

Hunter ACC User Manual - German - 108 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hunter ACC Manual

Product: