694113
14
Zoom out
Zoom in
Previous page
1/15
Next page
What if the device will not print?
Turn on the printer. By default, the device is set to turn o after 5 minutes. To change when the device automatically turns
o, open the HP sprocket app on your mobile device. Tap
, tap sprocket, and then tap Auto O. Select your desired
timing.
Charge the printer.
Conrm Bluetooth is turned on and paired with your printer. If the printer is already paired to your mobile device, turning
Bluetooth o and then on might resolve the issue.
Make sure the device has photo paper in the input tray. Load up to 10 sheets of HP Sprocket Plus Photo Paper with the
orange HP ZINK™ Smartsheet.
Move the printer and your mobile device closer together. Bluetooth signals can be weaker at greater distances.
Update the printer rmware. Make sure your mobile device is connected to the Internet and then open the HP sprocket
app. If there is a rmware update available, a rmware update screen displays. Follow the on-screen prompts to complete
the update. Your printer must be charged to 50% or higher before a rmware update.
Reset the printer. On the printer, locate the pin-hole under the Paper Cover, insert a straight pin into the hole to press the
reset button until the printer turns o. Restart the printer.
What can I do to improve print quality?
Use these recommendations and the sprocket app editing capabilities to improve print quality.
Use genuine HP Sprocket Plus Photo Paper. ZINK™ makes custom photo paper for a variety of printers, such as Polaroid,
LG, and HP. HP recommends using HP Sprocket Plus Photo Paper for best results. To purchase genuine HP Sprocket Plus
Photo Paper, go to hpsprocket.com/start. You can also purchase genuine HP Sprocket Plus Photo Paper from other retailers.
Always load the orange HP ZINK™ Smartsheet from the same pack of photo paper currently in the printer. Load the
orange HP ZINK™ Smartsheet into the paper tray with the barcode facing down and the photo paper with the HP logos
facing down.
Allow the printer a few minutes to cool down between print jobs.
Store the photo paper in a cool, dry place and avoid contact with water. If water spills on a photo, wipe it away as soon as
possible to prevent damaging the photo.
Update the printer rmware.
How do I clear a paper jam?
If the device stops feeding pages, it might be jammed. Clear paper jam and restart the device by sliding and holding the Power
Switch.
1. In the sprocket app, press OK to clear the error message.
2. Turn o the printer.
3. Remove the Paper Cover by sliding it away from the Output Slot. Remove any loose photo paper from the input tray.
4. Gently remove the jammed paper from the input tray.
5. Reload the remaining photo paper with the print side facing up.
6. Align the Paper Cover with the tracks on the outside of the printer, and then slide the Paper Cover toward the Output Slot
until it is rmly seated.
8. Turn on the printer.
See page 3 for paper loading illustrations.
13
Troubleshooting and FAQs
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP Sprocket Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP Sprocket Plus in the language / languages: English as an attachment in your email.

The manual is 3,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP Sprocket Plus

HP Sprocket Plus User Manual - German - 15 pages

HP Sprocket Plus User Manual - Dutch - 15 pages

HP Sprocket Plus User Manual - French - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info