682197
3
Zoom out
Zoom in
Previous page
1/16
Next page
2
LED Indicator Lights
Charging Indicator LED Light
LED Color/State Condition
O
Fully charged or not connected to a power source
Red, solid
Charging; printer can be used while charging
Red, blinking
During use, indicates a low battery before turning o. When o, user presses the
power switch and the device cannot power ON because of a low battery
Sele Mirror
Use the reective surface on the front side
of the Viewnder as a self-portrait mirror.
Instant Camera Flash Functions
When the device is powered on in
Instant Camera Mode, the camera will
automatically trigger the ash if it is
necessary for the light conditions.
Using the 10-second Timer Button
1. Press and release the Timer Button to toggle between turning the timer on and o.
2. Press the Shutter Release Button to begin the 10 second-countdown. A sound and white Timer LED Light will
alert you the timer is enabled. The timer will automatically disable after each photo is taken.
To cancel the timer while it is counting down, press the Timer Button.
The Timer LED Light will blink slowly for seven seconds and quickly for the nal three seconds before taking
the photo.
What if my HP Sprocket 2-in-1 isn’t responding or
won’t connect to my mobile device?
If you have trouble connecting or other issues,
reset the device. Remove the Paper Cover and
locate the pin-hole near the Paper Tray. Insert
a straight pin into the hole to press the Reset
Button until the printer turns o. Restart the
device.
Status Indicator LED Lights
LED Color/State Condition
O
The printer is OFF
White, solid
The printer is ON
White, fast blinking
The printer is booting up; LEDs will turn solid white when ON
White, slow blinking
Processing a print job from instant camera or mobile device
Red, solid
Printer in error state. Wait for the light to turn white to send a print job
Red, slow blinking
Out of paper. Insert more paper to continue printing
Micro-SD Storage LED Light
LED Color/State Condition
O
No Micro-SD card installed or card installed with available storage
Red, solid
Micro-SD storage is full. Photos cannot be saved, but can be printed
Red, slow blinking
Micro-SD card has space for approximately 20 more photos
Reset Button
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP Sprocket 2-in-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP Sprocket 2-in-1 in the language / languages: English as an attachment in your email.

The manual is 3,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP Sprocket 2-in-1

HP Sprocket 2-in-1 Additional guide - English - 14 pages

HP Sprocket 2-in-1 Additional guide - German - 14 pages

HP Sprocket 2-in-1 User Manual - German - 16 pages

HP Sprocket 2-in-1 Additional guide - Dutch - 14 pages

HP Sprocket 2-in-1 User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info