212587

HP scanjet n7710 Manual

36
Zoom out
Zoom in
Previous page
1/42
Next page
Paper jamming, skewing, misfeeds, or multiple-page feeds
• If the pages look skewed as they feed into the scanner paper path, check the resulting
scanned images in the software to ensure that they are not skewed.
• The pages might not be placed correctly. Straighten the pages and adjust the paper
guides to center the stack.
• The paper guides must be touching the sides of the paper stack to work properly.
Please ensure that the paper stack is straight and the guides are against the paper
stack.
• The document feeder or output tray might contain more than the maximum number
of pages. Load fewer pages in the document feeder, and remove pages from the
output tray.
• Clean the scanner paper path to help reduce misfeeds. If misfeeds still occur, clean
the feed roller. If misfeeds still occur, replace the feed roller. For information on how
to clean the paper path and how to clean or replace the feed roller, see the Care and
maintenance section.
Paper does not feed from the scanner
Re-load the pages into the document feeder, ensuring that they make contact with the
rollers.
Place small pages, such as business cards, lengthwise into the document feeder.
The scanner hatch might not be securely latched. Open the scanner hatch and then close
it by pressing firmly.
A problem with the scanner hardware might exist. Follow this procedure to test the
scanner:
1. Ensure that the power supply is securely connected between the scanner and a live
electrical outlet or surge protector. Check that the green LED on the power supply
connector is on to verify that the power supply is functional.
2. If the power supply is connected to a surge protector, ensure that the surge protector
is plugged into an outlet and turned on.
3. Disconnect the power supply from the scanner and turn off the computer. After 60
seconds, reconnect the power supply to the scanner and then turn on the computer,
in that order.
4. Try to rescan.
5. If the paper still does not feed properly, see the Product Support section of the printed
Setup and Support Guide that came with the scanner.
The bottom of the scanned image is cut off
By default, the scanner can scan media that is up to 355.6 mm (14 inches) long. For
longer pages, the end of the document is not included in the scanned image.
Verify that you have specified an appropriate page size in the scanning software.
For information on how to enable scanning of media up to 863.6 mm (34 inches), see the
Advanced Technical Features section.
Chapter 7
34 Troubleshooting
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP scanjet n7710 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP scanjet n7710 in the language / languages: English as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info