Wi-Fi Direct allows Wi-Fi capable devices, such as smart phones, tablets, or computers, to connect directly to the printer wirelessly without using a wireless router
or access point. Place the device close to the printer to ensure successful connection and printing.
NOTE:The following steps temporarily disconnect your remote device from the Internet. If you are printing web-based content such as emails, web pages,
orcloud-based documents, open them before proceeding.
1. Make sure the printer is turned on and in a ready state, and paper is loaded in the main input tray.
2. On the remote device, open the Wi-Fi menu, and then tap the printer with DIRECT in the name (Example: DIRECT-72-HP xxx) from the list of available
networks.
3. When prompted for a password, type 12345678. This is the default password to log in.
4. Open the item you want to print, and then tap Print from the app or action menu.
5. Select your printer from the list of available printers, and then tap Print.
6. Reconnect to your local Wi-Fi network after the print job completes.
Troubleshooting
Wireless connection troubleshooting
NOTE:Both 2.4 GHz and 5 GHz bands are supported.
Verify that the printer is within the range of the wireless network. For most networks, the printer must be within 30 m (100 ft) of the wireless access
point (wireless router). A USB cable might be required for temporary connection between the printer and the computer. To ensure that the wireless setup
information synchronizes correctly, do not connect the USB cable until prompted to do so.
Follow these steps to restore the network settings:
1. Remove the USB cable from the printer.
2. Press and hold the Wireless
button on the printer control panel. When the Ready LED and the Attention LED start blinking simultaneously, release
the Wireless button. Printer will restore network default automatically and restart.
3. When the Ready
LED is on, continue to install the software.
If your router supports Wi-Fi Protected Setup (WPS) mode, try to connect
through this mode:
1. Press the WPS
button on your router.
2. Within two minutes, press and hold the Wireless
button on the printer
control panel for at least three seconds, and then release the button.
3. The Wireless
LED and the Ready LED start blinking simultaneously.
Wait while the printer automatically establishes the network connection.
4. This process takes up to two minutes. When the network connection is
established, the Wireless
LED stops blinking and remains on.
Continue to install the software.
Check the Wireless LED status from the printer control panel:
1. If the Wireless
LED is o, it means that the wireless connection is not
established.
a. Press the Wireless button on the printer control panel.
b. After the Wireless
LED starts blinking, continue to install the software.
When the network connection is established, the Wireless
LED stops
blinking and remains on.
2. If the Wireless LED is on, it means that the wireless connection is
established.
a. Check the network name (SSID) info on the Conguration Report/Network
Summary: Press and hold the Resume
button until the Ready LED starts
blinking. After you release the Resume
button, the Conguration Report/
Network Summary prints. Verify the network name (SSID) on the report.
b. Make sure the computer is connected to the same wireless network to which
you are connecting the printer.
c. Continue to install the software.
3. If the Wireless LED is blinking, it means that the wireless connection is
not established.
a. Restart the printer and the router.
b. Manually connect the printer to your wireless network. Use Wi-Fi Protected
Setup (WPS) to connect the printer if the router supports WPS, or continue to
the next step.
c. Uninstall and reinstall the HP software.
User guide and additional support resources
The user guide includes printer usage and troubleshooting
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for HP LaserJet Ultra M206 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of HP LaserJet Ultra M206 in the language / languages: All languages as an attachment in your email.
The manual is 21,87 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
