59210
2
Zoom out
Zoom in
Previous page
1/2
Next page
www.hp.com/support
10a
10b
Windows
Macintosh
© 2007 Hewlett-Packard Development Company, LP.
Windows
®
is a U.S registered trademark of Microsoft Corporation.
USB
Install Macintosh printer software
1 Insert the printer software CD into the
CD-ROM drive.
2 Double-click the CD icon in the Finder
window, if it is not already open.
3 Double-click the installer icon.
4 Accept the licensing agreement.
5 Click Install.
Wait for the installation to complete.
No screen?
1. Click the Start button, then
select Run.
2. Click the Browse button.
3. Select HPPP CD in the Look in
drop-down list.
4. Select Setup, then click the
Open button.
5. Click OK, then follow the
onscreen instructions.
If there is no plug and play,
see the Reference Guide.
If the Windows software
installation fails:
1 Remove the CD from the computer’s CD-ROM
drive, and then disconnect the USB cable from
the computer.
2 Restart the computer.
3 Temporarily disable any software firewall and
close any anti-virus software. Re-start these
programs after the printer software is installed.
4 Insert the printer software CD in the
computer’s CD-ROM drive, then follow the
onscreen instructions to install the printer
software. Do not connect the USB cable until
you are told to do so.
5 After the installation finishes, restart the
computer.
Install Windows printer software
1 A wizard displays on your computer.
2 Follow the screens.
3 Insert the CD when directed.
4 The HP wizard screen displays.
5 Follow onscreen instructions in the
HP wizard.
If the Installation Fails...
Make sure the printer is powered on.
Make sure the cable connections are secure.
Need more help?
Printed in <country> 12/2007
Instale el software de la impresora
1 Aparecerá un asistente en su equipo.
2 Siga las instrucciones que aparecen en la pantalla.
3 Introduzca el CD cuando se le indique.
4 Aparecerá el asistente HP en la pantalla.
5 Siga las instrucciones del asistente que aparecen
en la pantalla.
Si hay un error en la instalación del software
de Windows:
1 Retire el CD de la unidad de CD-ROM y, a continuación,
desconecte el cable USB del equipo.
2 Reinicie el equipo.
3 Desactive temporalmente los cortafuegos y cierre el software
antivirus. Reinicie estos programas una vez que se haya
instalado la impresora.
4 Introduzca el CD del software de la impresora en la
unidad de CD-ROM del equipo y, a continuación, siga
las instrucciones que aparecen en pantalla para instalar
el software de la impresora. No conecte el cable USB hasta
que se le indique.
5 Una vez terminada la instalación, reinicie el equipo.
Instale el software de la impresora de Macintosh
1 Introduzca el CD del software de la impresora en la
unidad de CD-ROM.
2 Haga doble clic en el icono del CD en la ventana
Finder si aún no está abierta.
3 Haga doble clic en el icono del instalador.
4 Acepte el acuerdo de licencia.
5 Haga clic en Instalar.
Espere a que se complete la instalación.
Si hay un error en la instalación…
Compruebe que la impresora esté encendida.
Compruebe que las conexiones de los cables
estén bien conectadas.
¿Necesita más
ayuda?
Printed in <country> 12/2007
¿No aparece la pantalla?
1. Haga clic en el botón Inicio y, a continuación,
seleccione la opción Ejecutar.
2. Haga clic en el botón Examinar.
3. Seleccione el CD HPPP en la lista desplegable
de la opción Buscar en.
4. Seleccione la opción Configuración y, a continuación,
haga clic en el botón Abrir.
5. Haga clic en Aceptar y siga las instrucciones que
aparecen en la pantalla.
Si no hay ningún dispositivo plug and play, consulte
la Guía de referencia.
Installation du logiciel d’impression
Windows
1 Un assistant s’ouvre sur votre ordinateur.
2 Suivez les invites à l’écran.
3 Insérez le CD lorsque le système vous y invite.
4 L’assistant HP s’affiche.
5 Suivez les instructions de l’assistant HP.
Pas d’écran ?
1. Cliquez sur le bouton Démarrer, puis
sélectionnez Exécuter.
2. Cliquez sur le bouton Parcourir.
3. Dans la liste déroulante Rechercher dans,
sélectionnez le CD HPPP.
4. Sélectionnez Setup, puis cliquez sur
le bouton Ouvrir.
5. Cliquez sur OK, puis suivez les instructions
affichées.
Si la fonction Plug And Play ne fonctionne pas,
reportez-vous au guide de référence.
Si l’installation du logiciel Windows
échoue…
1 Retirez le CD du lecteur, puis débranchez
le câble USB de l’ordinateur.
2 Redémarrez l’ordinateur.
3 Désactivez et fermez provisoirement vos logiciels
pare-feu et antivirus. Redémarrez ces programmes
une fois l’imprimante installée.
4 Insérez le CD du logiciel de l’imprimante dans
le lecteur de l’ordinateur, puis suivez les instructions
à l’écran pour installer le logiciel. Ne branchez
pas le câble USB avant qu’un message ne vous
le demande.
5 Une fois l’installation terminée, redémarrez
l’ordinateur.
Installation du logiciel d’impression
Macintosh
1 Insérez le CD du logiciel de l’imprimante dans
le lecteur.
2 Si le contenu du CD ne s’affiche pas
automatiquement, double-cliquez sur
l’icône du CD dans la fenêtre du Finder.
3 Double-cliquez sur l’icône du programme
d’installation.
4 Acceptez le contrat de licence.
5 Cliquez sur Installer.
Attendez que l’installation se termine.
Si l’installation échoue…
Assurez-vous que l’imprimante est sous tension.
Vérifiez les branchements des câbles.
Plus d'informations ?
Printed in <country> 12/2007
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP Deskjet D2560 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP Deskjet D2560 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 7,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP Deskjet D2560

HP Deskjet D2560 Quick start guide - English - 16 pages

HP Deskjet D2560 User Manual - English - 121 pages

HP Deskjet D2560 Additional guide - German - 129 pages

HP Deskjet D2560 Quick start guide - German - 16 pages

HP Deskjet D2560 Installation Guide - German - 2 pages

HP Deskjet D2560 Additional guide - Dutch - 123 pages

HP Deskjet D2560 Quick start guide - Dutch - 16 pages

HP Deskjet D2560 Installation Guide - Dutch - 2 pages

HP Deskjet D2560 Quick start guide - French - 16 pages

HP Deskjet D2560 Quick start guide - French - 16 pages

HP Deskjet D2560 Installation Guide - French - 2 pages

HP Deskjet D2560 Quick start guide - Italian - 16 pages

HP Deskjet D2560 Installation Guide - Italian - 2 pages

HP Deskjet D2560 Quick start guide - Spanish - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info