Manual Honeywell ST9400S (page 13 of 18) (English)

613684

Zoom out

Zoom in

1/18

FINE TUNING YOUR ST9400S

To Enter Installer Mode:

a. Ensure the slider is in the RUN position, then press and hold and buttons

together for 8 seconds. Ignore the ‘NOT VALID’ message that is displayed for a

few seconds. The message ‘SET UP MENU’ will show brieﬂy, followed by ‘SET

INSTALLER OK ?’

b. Press the button to take you into the Installer Mode Parameter Menu.

c. Parameter 1 is now available to change. This is to allow you to change the

clock format from 12 hour AM/PM to 24 hour. At every step, the LoT™ Display

will inform you what the parameter means and what option you have selected.

The parameter number is shown on the display separated by a colon from the

parameter value.

d. You can change the parameter value by pressing the or buttons. At this

point the description in the LoT™ Display will change and the parameter value

will ﬂash. If you press the value will stop ﬂashing and be saved for use.

e. Press to move to the next parameter available for editing.

f. Keep pressing to step around the list of parameters, and use or

buttons to change the parameter value.

g. Any parameter changes that have been conﬁrmed with the button will be

saved and used.

To Exit Installer Mode:

h. You can exit Installer Mode at any time by moving the slider to the next position

and then back again to RUN.

Note: Installer Mode will exit automatically after 10 minutes if the slider is not

moved.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell ST9400S in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell ST9400S

Honeywell ST9400S Quick start guide - English - 2 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Honeywell ST9400S Manual

Product: