613684
1
Zoom out
Zoom in
Previous page
1/2
Next page
Copyright©Honeywell
50029833-004 A
HOT WATER HEATING
GUIDE TO THE USE OF THE ST9400S PROGRAMMER:
The purpose of the Programmer is to control the times when the heating and hot water can be switched on.
MODE buttons Slider
Normal Use:
Lift the flap to make sure the Slider is in the RUN position.
Also make sure that both hot water and heating are operating in AUTO or
ONCE mode, by pressing the MODE buttons repeatedly until the display
shows AUTO or ONCE.
AUTO means on and off twice each day, following the programme.
ONCE means coming on at the first programme time then off at the last
programme time.
To turn the hot water and heating OFF:
(1) Keep pressing the hot water MODE button until the display shows that
hot water is OFF. If the hot water was on, the light will turn off.
(2) Keep pressing the heating MODE button until the display shows that
heating is OFF. If the heating was on, the light will turn off.
To turn the hot water and heating ON:
(1) Keep pressing the hot water MODE button until the display shows
CONT (this is short for continuous). The hot water light will turn on.
The hot water will not turn off in this position.
(2) Keep pressing the heating MODE button until the display shows
CONT (this is short for continuous). The heating light will turn on.
The heating will not turn off in this position.
Temporary Overrides to the Set Programme:
To turn the hot water ON press the hot water OVERRIDE button the light
will turn ON, unless the hot water is operating in the OFF mode.
To turn the hot water OFF press the hot water OVERRIDE button again
– the light will turn OFF.
This button will only work in the AUTO or ONCE modes. It will NOT work
in the OFF or CONT modes.
At the next SET time the Programmer will go back to automatic
operation.
(The same applies to the heating OVERRIDE button)
For a temporary boost of heating or hot water, press the corresponding
EXTRA HOUR button.
Pressing once brings the heating or hot water ON for 1 hour.
Press twice for 2 hours extra, three times for 3 hours extra.
Pressing again will turn the heating OFF.
This button works in the AUTO, ONCE, and OFF modes. It will NOT work
in the CONT mode.
If the heating or hot water is already ON, pressing the corresponding
EXTRA HOUR button will add the extra hours to the end of the current
ON period.
For guidance on the operation of the other buttons please refer to the complete user instructions supplied with the
product.
Hot Water
OVERRIDE button
HOT WATER HEATING
EXTRA HOUR
OVERRIDE
EXTRA HOUR
OVERRIDE
OK
NEXT
DAY/TIME
HOT WATER
HEATING
RUN
ST940 0S
(1) (2)
HOT WATER HEATING
EXTRA HOUR
OVERRIDE
EXTRA HOUR
OVERRIDE
Heating
OVERRIDE button
Hot Water
EXTRA HOUR button
HOT WATER HEATING
EXTRA HOUR
OVERRIDE
EXTRA HOUR
OVERRIDE
Heating
EXTRA HOUR button
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell ST9400S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell ST9400S in the language / languages: English as an attachment in your email.

The manual is 0,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell ST9400S

Honeywell ST9400S User Manual - English - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info