471572
4
Zoom out
Zoom in
Previous page
1/16
Next page
4
Period 1 2 3 4
Time 6:30 8:00 18:00 22:30
Temperature 21°C 18°C 21°C 16°C
The Built-in Heating Program
Thebuilt-inheating programhas4 temperaturelevelchanges thatcanbesetbetween3.00am
and2.50amthefollowingday-allowingyoutomaintaintheeveningtemperatureaftermidnight.
Eachtemperaturelevelcanbesetbetween5°Cand35°C,andadjustedin0.5°Cincrements.The
factorydefaultprogramforheatingisasfollows.
Reviewing the Heating Program
TorevieworedittheheatingprogramusethePROGRAM or buttonstonavigatebetween
the4individualprogrammingperiods.
Modifying the Heating Program
To change the heating program:
a. Press either of the PROGRAM or buttons to
entertheprogrammingmode.Thetime/temperature
settingsforperiod
1
willbe ashingas shown.The
active period is highlighted by a ashing square
aroundthenumbersatthebottomofthescreen.
b. Toadjusttheperiodstarttimeusethe or buttons,thedisplaywillstopashingandthe
‘OK?’indicatorwillbedisplayed.Holdingthebuttondownwillchangethetimequickly.
Note: If you are pressing the or buttons and the display flashes the next period, it
means the next period will be pushed forward.
c.
Oncetherequiredtimeisreachedpressthegreen buttontoconrm.
Note: If the original time setting did not require adjustment press the green button to move
to step ‘d’.
d.
Thetemperaturesettingforperiod
1
willnowbeashing.Toadjustthispressthe or
buttonsandconrmthesettingagainbypressingthegreen button.
e.
The nexttime andtemperature periodwill nowbe active.Adjustthis byrepeatingstepsb - d
aboveuntilall4periodsaresetorpresstheAUTO buttontoruntheprogramasset,atanytime.
Disabling / Enabling Time Periods
Thethermostathas4periodsthatcanbeprogrammed,butyoumaynotneedalloftheseswitch
pointsforyourheatingrequirements.Therefore,anyperiodfrom2to4canberemovedfrom(or
returnedto)theheatingprogramprole.
To disable or enable time periods:
a. Todisableunwantedperiodsgotothedesiredperiod(
2
to
4
)usingthePROGRAM or
buttonstonavigate,ensurethecorrectperiodishighlightedwiththeashingsquaresymbol.
Pressandholdthe buttonforatleast2secondsandthedisplaywillindicatetheperiodhas
beenremovedfromtheprogram.
b. Toenableperiodsagainfollowthesameprocedureasabove,navigatingtothealreadydisabled
period.Toenablethisperiodagainpressandholdthe buttonforatleast2seconds.
4321
‘Efficient Daily Use’ PROGRAMMING THE CM721
4


Need help? Post your question in this forum.

Forumrules
1

Forum

honeywell-cm721

Reset search

  • Green light on red light flashing box next to boiler why .
    Thank youb Submitted on 6-4-2022 at 21:00

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell CM721 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell CM721 in the language / languages: English as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell CM721

Honeywell CM721 Installation Guide - English - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info