Basic Setup
1. Insert one end of the HDMI cable into your PC's graphics card. DVI, VGA, or
display port (DP) may also be used. These cables are not included.
Note: For optimal refresh rate (or "performance") at 144hrz, it is recommended to
use a Display Port (DP) or DVI-D dual link cable with the monitor's corresponding
connector.
2. Connect the other end of the video cable to the corresponding connector on
your monitor. See the image below.
3. Connect the power cable to your monitor then connect the other end to your
power source such as a wall outlet or surge protector. It is recommended to
use a surge protector.
4. Locate the power button on the monitor and press it to turn the monitor on.
Note: If you cannot locate the power button, please refer to the Control Panel
Section on the next page.
If desired, you can use the monitor's FreeSync feature. The feature itself is on by
default. In order to use this feature, please note you must have hardware with
FreeSync capability, a DP, and the latest graphic drivers. To use FreeSync, connect
the appropriate cable to the DP connectors on both the computer and the
monitor.
After connecting, you will receive a prompt to enable FreeSync on your computer.
Indicator Light
This light is located on the front of the monitor.
Solid blue light indicates power is on and the monitor is operating normally.
Flashing blue light indicates no video source has been detected. Please ensure
your
PC is on and all video cables are fully inserted and/or connected.
All specifications and informations are subject to change without notice.
-2-
DP connectorDVI connector HDMI connector AC.IN connectorAudio Input (Option)
Safety Precautions and Maintenance
1. Before cleaning, always unplug your monitor. It is recommended to use dry
cloth or lightly damp cloth to clean your monitor. Dry cloth is, however, the
safest. If using damp cloth, wait for your monitor to completely dry before
plugging it in again.
2. Do not use alcohol or ammonia-based cleaner and/or liquids to clean your
monitor.
3. This monitor features ventilation openings on the back of the unit. Avoid
blocking these openings to prevent the monitor from overheating.
4. Avoid placing this monitor near any heat sources ex: portable heater or
heating vent, as this may cause damage to your monitor.
5. Do not spray cleaner and or any kind of liquid directly onto the monitor's
screen.
6. Do not insert anything into any part of the monitor including the ventilation
openings.
7. Always make sure your monitor is placed on a secure, level surface to
prevent it from falling and sustaining damage.
8. Unplug your monitor during any extended periods of time where it will not
be used.
9. Do not place heavy items on the monitor or monitor cables.
10. Do not attempt to dissemble the monitor or remove parts from this monitor.
Any disassembly or modification etc. not performed by an authorized
technician can result in damage to the monitor and/or possible exposure to
high voltage electricity which may lead to serious injury or death.
Box Contents
1x Monitor
1x German Power cable
1x German to UK Plug Converter
1x HDMI Cable
1x User Manual
1x Warranty Card
All specifications and informations are subject to change without notice.
-1-
Indicator Light
