Manual Hendi 970430 (page 5 of 28) (English, German, Dutch, French, Italian, Polish)

741182

Zoom out

Zoom in

1/28

6. AUTOMATIC MODE

1. The display shows a highlighted red line at the

bottom next to the “MAN” label – this marks the

manual cycle.

2. Push the SET/SEAL button shortly – the line

starts ﬂashing.

3. Using the START/STOP button, other lines are

activated (the second and third line with AUT 1

and AUT 2 label respectively).

4. As long as the lines are ﬂashing you can change

the mode from manual to one of the two availa-

ble automatic modes.

5. After selecting the desired operation mode of

the machine, a digit from 1-9 starts ﬂashing. It

indicates the vacuum level.

6. The vacuum level may be increased using the

START/STOP button or decreased using the

SET/SEAL button but only when the digit is

ﬂashing.

7. After setting the vacuum level the digit stops

ﬂashing automatically and disappears. The dis-

play shows a highlighted line (lines) which indi-

cates the operation mode.

8. In the automatic mode (AUT 1 and AUT 2) press

START/STOP to start the packing machine.

9. After removing air from the bag the machine

will activate the heating strip automatically and

switch off the pump.

10.

When the manometer shows the minimum value,

you can easily open the lid of the machine.

7. CLEANING AND MAINTENANCE

• Always remove the plug from the socket before

cleaning the appliance.

• Beware: Never immerse the appliance in water

or any other liquid!

• Clean the outside of the appliance with a damp

cloth (water with mild detergent).

•

Never use aggressive cleaning agents or abrasives.

Do not use any sharp or pointed objects. Do not

use petrol or solvents! Clean with a damp cloth

and detergent if necessary. Do not use abrasive

materials.

• Clean the ventilation slots (if applicable) with the

vacuum cleaner.

8. WARRANTY

Any defect affecting the functionality of the appli-

ance that becomes apparent within one year after

purchase will be corrected by free repair or re-

placement provided the appliance has been used

and maintained in accordance with the instructions

and has not been abused or misused in any way.

Your statutory rights are not affected. If the appli-

ance is claimed under warranty, state where and

when it was bought and include proof of purchase

(e.g. receipt).

In line with our policy of continuous product devel-

opment we reserve the right to change the product,

packaging and documentation speciﬁcations with-

out notice.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 970430 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 0,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 970430 Manual

Product: