534560
10
Zoom out
Zoom in
Previous page
1/11
Next page
AVR
10
AVR Setup, General Specifications
9. Measure the distance from each speaker to the listening position, and write it down.
(Even if all of your speakers are the same distance from the listening position, you will
need to do this.)
10. Enter the distance that you measured from each speaker to the listening position.
Select a speaker, then use the Left/Right buttons to change the measurement.
You can enter distances between 0 and 30 feet (9.1m). The default distance for all
speakers is 10 feet (3m).
If you want to use metric measurements, select “Unit” and use the Left/Right buttons
to change the units to meters.
11. When you’re nished, press the OSD/Menu button to exit the menu system.
Assign Connectors to the AVR’s Source Buttons
1. Review the input connections you listed on the Source Buttons and Assigned
Connectors table, on page 5. Note what changes (if any) you want to make from the
default connector assignments that appear on the list.
2. Turn on your TV and select the TV input where you connected the AVR in Connect Your
TV or Video Display, on page 4.
3. Press the remote control’s OSD/Menu button. The AVR’s on-screen display (OSD) setup
menu will appear on the TV. (Note: If you have used a composite video connection to
your TV, the OSD menus will not appear on your TV. Follow the steps below using the
AVR’s front-panel display.)
MASTER MENU
Source Select
Source Setup
Surround Mode
Speaker Setup
Zone2
Network
System Setup
4. Use the remote’s arrow and OK buttons to select “Source Setup,and use the left/right
arrow buttons to select a source button with connectors that you want to re-assign.
Source Setup
Source
Title
Video In
Audio In
Tone
Bass
Treble
Night Mode
Lip Sync
Disc
HDMI 2
HDMI 2
OFF
0
0
OFF
0mS
5. Select “Video In” and select the video input connector you want to assign to the source
button. Press the OK button. NOTE: If you select an HDMI connector as the video input
connector, the audio input connector will automatically change to the same HDMI
connector. You cannot use a different audio input connector with an HDMI video input
connector.
Source Setup
Source
Title
Video In
Audio In
Tone
Bass
Treble
Night Mode
Lip Sync
Disc
HDMI 3
HDMI 3
OFF
0
0
OFF
0mS
6. If you have not selected an HDMI connector for Video In, select “Audio In” and select
the audio input connector you want to assign to the source button. Press the OK button.
Source Setup
Source
Title
Video In
Audio In
Tone
Bass
Treble
Night Mode
Lip Sync
Disc
Composite 1
Optical 1
OFF
0
0
OFF
0mS
7. Press the remote’s Back/Exit button and repeat steps 3 6 for the remaining source
buttons with connectors you want to re-assign.
You are now ready to enjoy your AVR!
IMPORTANT: For complete information about using all of your audio/video
AVR’s features and capabilities, download the AVR 1710, AVR 171/230,
AVR 171/230C, AVR 1610, AVR 161/230, AVR 161/230C Owner’s Manual
or the AVR 1510, AVR 151/230, AVR 151/230C Owner’s Manual from
www.harmankardon.com.
General Specifications
Power consumption
(AVR 1710/AVR 171):
(AVR 1610/AVR 161):
(AVR 1510/AVR 151):
<0.5W (standby); 510W (maximum)
<0.5W (standby); 450W (maximum)
<0.5W (standby); 410W (maximum)
Dimensions (W x H x D): 17-5/16" x 4-3/4" x 11-13/16"
(440mm x 121mm x 300mm)
Weight
(AVR 1710/AVR 171):
(AVR 1610/AVR 161):
(AVR 1510/AVR 151):
11 lb (5.1kg)
10 lb (4.6kg)
10 lb (4.6kg)
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon AVR 151 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR 151 in the language / languages: English as an attachment in your email.

The manual is 3,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon AVR 151

Harman Kardon AVR 151 User Manual - English - 47 pages

Harman Kardon AVR 151 User Manual - Dutch - 47 pages

Harman Kardon AVR 151 User Manual - French - 47 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info