534560
9
Zoom out
Zoom in
Previous page
1/11
Next page
9
AVR
Configure the AVR for Your Speakers: AVR 1510/AVR 151
Note: The on-screen menus shown in this guide may differ slightly from your AVR’s actual
menu screens.
Before you use your AVR you need to congure it to work with your speakers and to
compensate for the acoustic characteristics of your room. Before beginning, place your
loudspeakers as explained in the Place Your Speakers section, on page 2, and connect
them to the AVR as explained in the Connect Your Speakers section, on page 4.
1. Turn on your TV and select the TV input where you connected the AVR in Connect Your
TV or Video Display, on page 4.
2. Press the remote control’s OSD/Menu button. The AVR’s on-screen display (OSD) setup
menu will appear on the TV. (Note: If you have used a composite video connection to
your TV, the OSD menus will not appear on your TV. Follow the steps below using the
AVR’s front-panel display.)
MASTER MENU
Source Select
Source Setup
Surround Mode
Speaker Setup
Network
System Setup
3. Use the remote’s arrow and OK buttons to select “Speaker Setup.”
Speaker Setup
Speakers
Crossover
Distance
Output Adjust
4. Select “Speakers.”
Speakers
Front Left/Right
Center
Surr Left/Right
Subwoofer
On
On
On
On
5. Use the Up/Down buttons to select a speaker group and use the Left/Right buttons to
select “On” when the speakers are present in the system, or”Off” for positions where
no speakers are installed. The Front Left/Right setting is always On and may not be
disabled. (Note: The settings in this menu affect the remainder of the speaker-setup
process and the availability of various surround-sound modes.)
6. Press the Back/Exit button to return to the Manual Setup screen, then select
“Crossover.”
Crossover
Front Left/Right
Center
Surr Left/Right
Subwoofer
100Hz
100Hz
100Hz
100Hz
Consult the technical specications for all of your speakers and locate their frequency
response, usually given as a range, e.g., 100Hz – 20kHz (±3dB). Write down the lowest
frequency that each of your speakers is capable of playing (100Hz in the above example).
7. Use the Left/Right buttons to set each speaker group’s crossover frequency to the
frequency that most closely matches the frequency you noted above in the speaker’s
specications. If the speaker’s crossover frequency is lower than 40Hz, select the rst
option, “Large.” (This setting doesn’t refer to the speaker’s physical size but to its
frequency response, which is also called “full range.”)
We recommend that you set the Subwoofer Crossover to the same frequency you use
for the Front Left/Right speaker setting.
Your AVR will divide the source signal at the crossover frequency; all information above
that crossover point will be played through your system’s speakers, and all information
below the crossover point will be played through the subwoofer. This way, each
loudspeaker in your system will perform at its best, delivering a powerful and enjoyable
sound experience.
If you set the Front Left/Right speakers to “Large,” select one of the three following
settings for the subwoofer:
L/R+LFE: This setting sends all low-frequency information to the subwoofer, including
a) low-frequency information that is also played through the front left and right
speakers and b) the special LFE (low-frequency effects) channel information that is
present on some DVDs, Blu-ray
discs and other digital programming.
LFE: This setting plays low-frequency information contained in the full-range program
channels through the front left and right speakers, and directs only the LFE-channel
information to the subwoofer.
OFF: Select this setting when no subwoofer is in use. All low-frequency information will
be sent to the front left and right speakers.
8. When you’re nished, press the Back/Exit button to return to the Manual Setup screen,
then select “Distance.”
Distance
Front Left
Center
Front Right
Surround Right
Surround Left
Subwoofer
Delay Reset
Unit
10Ft
10Ft
10Ft
10Ft
10Ft
10Ft
F eet
AVR Setup
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon AVR 151 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR 151 in the language / languages: English as an attachment in your email.

The manual is 3,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon AVR 151

Harman Kardon AVR 151 User Manual - English - 47 pages

Harman Kardon AVR 151 User Manual - Dutch - 47 pages

Harman Kardon AVR 151 User Manual - French - 47 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info