607815

Hama 40095 - 5in1 Manual

6
Zoom out
Zoom in
Previous page
1/24
Next page
10
11
“Punch through”
The punch through function lets you execute
specifi c functions on a device type other
than the one that is selected. These are the
volume, mute, and playback functions.
When the remote control is set to AUX, VCR,
or DVD mode, the Volume (7) and Mute (17)
buttons control the TV device (provided the
other devices do not have their own volume
control).
In TV mode or another mode without
playback functions, the Play, Pause, Stop and
(where applicable) Record buttons control
a connected video recorder, DVD player,
or DVD recorder. The controlled device is
always the last selected device.
By default, the universal remote control is
set so that the volume and mute functions
automatically control the TV set when a
source button for a video device (DVD, video
recorder, etc.) is being pressed.
Programming volume/mute to a different
device type
• Press and hold the Setup (16) button
for approx. 3 seconds until the red LED
remains lit.
• Press and hold the Mute (17) button until
the red LED briefl y goes out.
• Press a source button for the device to
which the volume and mute functions are
to be transferred. The red LED stays on.
• Press the Mute (17) button; the red LED
goes out.
• If you accidentally select a device which
does not have its own volume control, the
red LED fl ashes for 3 seconds.
Programming volume/mute to a specifi c
device type
• Press and hold the Setup (16) button
for approx. 3 seconds until the red LED
remains lit.
• Press and hold the Mute (17) button until
the red LED briefl y goes out.
• Press the source button for the device
which is only to have its own volume and
mute functions.
• Press the “-” Volume (7) buttons; the red
LED stays on.
• Press the Mute (17) button again; the red
LED goes out.
Resetting volume/mute
If you have changed the volume and mute
as described in the previous two sections,
you can reset these functions to their factory
settings and thereby restore the “punch
through” function.
• Press and hold the Setup (16) button
for approx. 3 seconds until the red LED
remains lit.
• Press and hold the Mute (17) button until
the red LED briefl y goes out.
• Press the Mute (17) button again; the red
LED goes out.
The volume and mute “punch through”
functions are now returned to their default
state.
Debugging
The remote control does not function:
• Check the batteries of the remote control
are correctly inserted and the polarity
+/- is right
• Check your devices are correctly
connected and turned on.
• If the batteries are too weak, you
exchange these through new.
• Several device codes are performed
under the brand name of my device. How
do I determine the correct device code?
• In order to determine the correct
device code for your device, you try out
the codes after each other until most
functions of the device function properly.
The devices react only to some commands of
the remote control:
• You test further codes, to which according
to devices by the commands react.
• If the manual code input and the
automatic code search do not lead to
the success, it can happen in special
individual cases that the device is not
compatible to your universal remote
control.
00040095bda.indd Abs1:10-Abs1:1100040095bda.indd Abs1:10-Abs1:11 11.12.2008 11:59:15 Uhr11.12.2008 11:59:15 Uhr
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hama 40095 - 5in1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hama 40095 - 5in1 in the language / languages: English, German, Dutch, French, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info