771642
7
Zoom out
Zoom in
Previous page
1/9
Next page
7
9&20*1'9&20*1'
'89/-;<8,(399+<+8
de ontvangende apparatuur voor de communicatieapparatuur van derden, de detector
biedt het standaard Modbusrtu protocol, BM1 dipschakelaar: 1: AAN; 2: UIT, De
communicatie tussen de detector en de airconditioning is consistent met de andere 3.
Wanneer de detector wordt gebruikt als een protocolomzetter van derden, moet deze
specieke toegang tot the vereisten van de ontvangende apparaatverbinding van de derde
partij hebben; de basisfuncties zijn als volgt:
Het adres van het adres dat is ingesteld door SW1 verandert in het ondergeschikte adres in
de Modbus RTU-communicatie
Seriële poort 9600,8,n,1
130B modbusrtu Aanvraag 01 controle 05/15
WOORD naam Eenheid Bereik Opmerkingen
0 1
functiecode
0 Binnenunits aan / uit Lees de werking om de huidige status van de schakeleenheid 0: uit 1: aan te
verkrijgen
Schrijfbewerking om de schakeltoestand 0: uit 1: aan te wijzigen
03 functiecode vraag 03 controle 06/16 
0 Interne
insteltemperatuur
16-30 Lees de bewerking, krijg de huidige ingestelde temperatuur,
schrijf de werking, Wijzig de ingestelde temperatuur
1 binnen de
machineloopmodus
1-5 Lees de bewerking om de huidige werkingsmodus te
verkrijgen: 1 - koeling 2 - verwarming 3 - ontvochtiging 4 -
Alleen ventilator 5 - automatisch
Schrijf werking om de bedieningsmodus te wijzigen: 1 - koeling
2 - verwarming 3 - ontvochtiging 4 - Alleen ventilator 5 -
automatisch
2 Ventilator snelheid 1-4 Lees de werking om de huidige ventilatorsnelheid te verkrijgen:
1 - lage snelheid 2 - gemiddelde snelheid 3 - hoge snelheid 4 -
automatische snelheid
Schrijf werking om de ventilatorsnelheid te wijzigen: 1 -
lage snelheid 2 - gemiddelde snelheid 3 - hoge snelheid 4 -
Automatische snelheid
3 binnen control mode 1-4 1 is niet geblokkeerd; 2 leeg - vraag terug naar 1, verstrekt om
1 te schrijven; 3 vraag terug naar 1, verstrekt om 1 te schrijven;
4 - slot
04 functiecode alleen
lezen
0 binnentemperatuur 30 1
1 Foutcode 0-256 binnen de indoor foutcode 0-256 waarde van 0 dat geen fout,
2 machinenummer Het aantal interne binnen Dit adres bestaat om in lijn te blijven
met de VRF, vraag terug 0
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haier YCJ-A002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haier YCJ-A002 in the language / languages: Dutch as an attachment in your email.

The manual is 0.2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info