771642
2
Zoom out
Zoom in
Previous page
1/9
Next page
2
Commando’s van de centrale controller volgens de units adresseren wat is ingesteld
door de detector dipschakelaar. En om interne controle of vraagverzoek te realiseren,
en de ontvangststatus en airconditioning bedrijfsinformatie en foutinformatie te
beantwoorden.
Dubbele schakelfunctie
Om de betrouwbaarheid van de airconditioning te verbeteren, heeft de detector een
dubbele schakelfunctie, stelt SW1 in op modus met één unit, de detector bestuurt de
A-unit volgens het commando van de hostapparatuur. Set SW1 to double switching
mode, it can realize double switching function.
Realisatie van dubbele schakelfunctie: onder normale omstandigheden bestuurt de
detector één eenheid AAN en een andere eenheid UIT, wanneer de schakeltijd wordt
bereikt, activeert de detector de UIT status eenheid en de AAN status eenheid werkt
dan nog steeds een half uur en gaat vervolgens UIT.
Als een van de airconditioners een storing heeft, stopt de schakeltijd, activeert de
detector automatisch een andere unit en laat de defecte unit UIT en uploadt vervolgens
de storingsinformatie. Schakel na het herstellen van de fout automatisch over naar
de dubbele schakelfunctie; als de airconditioner enige tijd werkt en de ingestelde
temperatuur niet kan bereiken, stopt de schakeltijd, schakelt de detector automatisch
een andere airconditioner in, werken dubbele units totdat de ingestelde temperatuur
is bereikt, schakelt dan automatisch die airconditioner uit en herstelt automatisch de
dubbele schakelfunctie. De standaard schakeltijd is 12 uur
Adresinstelfunctie
De detector met 8-bits dipschakelaar (SW1), de hoogste bit D8-bit, voor het instellen
van de enkele modus of dubbele schakelaar modus (D7, D6, D5, D4, D3, D2, D1) wordt
gebruikt om het nummer in te stellen (centraal controlenetwerk of dubbele schakeltijd
bij selectie van de scheidende schakelaar modus)
Werkingsstatus wergave functie
Detector heeft drie lampjes, geel lampje is voor RS-485-communicatie, het rode en
groene lampje zijn voor de communicatie van de airconditioner, Als de communicatie
normaal is, gaat het lampje branden in overeenstemming met de frequentie van 0,5
sec. Knipperen, wanneer er een storing is , licht op volgens de frequentie van 1s
knipperen, stopt 2s met knipperen
Vertragingscontrolefunctie
Via de RS-485 bus om een centraal controlenetwerk te bouwen.Om de impact van een
uniforme werking van airconditioning op het elektriciteitsnet te verminderen, stelt de
detector de vertragingsstartfunctie in, de vertragingstijd wordt automatisch gegenereerd
door de detector
【1】 【2】 BM1
0: UIT 1: AAN nummer 485 details van de communicatiemodus
0 0 YCZ-G001 / HC-SA164DBT / A004 enkele
eenheid
10YCZ-G001 / HC-SA164DBT / A004 VRF-model
01 Modbus RTU standaardprotocol
1 1 BMS systeem
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Haier YCJ-A002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Haier YCJ-A002 in the language / languages: Dutch as an attachment in your email.

The manual is 0.2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info