Manual Gys CT160 (page 5 of 23) (English, German, Dutch, French, Italian, Portuguese, Spanish)

625723

Zoom out

Zoom in

1/23

DESCRIPTION OF THE CHARGER (FIG I, PAGE 2)

The chargers CT 160 and CT 210 are designed to charge lead acid batteries with liquid electrolyte,

nominal voltage from 12V, and with capacity according to the table II, page 2.

1 – Ammeter 5 – Fuse

2 – Battery voltage selector 6 – cables + clamps

3 – Battery capacity selector 7 – handle (CT 210 only)

4 – Main switch 8 – Power supply (CT160 : fixed / CT210 : removable)

CHARGER MODE

Preliminary precautions

• For indoor use, with good ventilation. Protect the charger from rain and moisture.

• Remove the battery caps if there is, and check the level of liquid. If it is not correct, filled up with

distilled water. Clean well the battery terminals.

• Check if the battery capacity and voltage are compatible with your charger. Do not charge the

battery when it is connected on the vehicle

Connection and disconnection

• Connect the clamps (+ red, - black) to + and - battery terminals, making sure you get a good electric

contact, respecting the following order:

▪ Connect first the battery terminal not connected to the chassis of the vehicle.

▪ Then connect the other connection to the chassis remote from the battery and any fuel line.

▪ At last, plug in your charger to 230 V 50/60 Hz mains supply.

• Choose the charge voltage (12 / 24V) and the charge speed (normal or boost). The « Boost »

function allows charging a battery quickly.

Control and end of the charge process

• These are traditional chargers; the charge process must be stopped manually.

• The ammeter is a charge indicator. When the current drops down to 0, the battery charge is ending.

You can stop the charge process. In normal mode, it takes about 10 hrs to fully charge a battery. If

the ammeter is not at the minimum after this period, check the charge mode and voltage or have the

battery checked by a professional.

• Do not let the charger connected more than 24 Hours on a battery.

• After charging, disconnect the battery charger from main supply. Then remove the chassis connection

and the battery connection, in this order.

PROTECTIONS

Your product has been developed with a maximum of protections.

• The clamps of the battery are isolated.

• The polarity reversal will not cause danger. The protection is insured by an automotive fuse, which

must be changed in case of polarity error. Respect the rating of the fuse, which is indicated on the

charger.

• This device is protected by an internal fuse to avoid any risk in case of damage to the charger.

(CT160 : 1,6A – CT210 : 2A)

• Thermal protection: the transformer of the product is protected by a thermal switch. If the charger is

used intensively, it may switch in thermal protection mode (cooling time about 15min), and then

resume the charge.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gys CT160 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gys CT160 Manual

Product: