623122

Gude GTB 16-5 R - 55190 Manual

26
Zoom out
Zoom in
Previous page
1/88
Next page
22
GTB 16/5R | GTB 16/12RL
GB
ENGLISH
Requirements for operating sta
The operating sta must carefully read the Opera-
tingInstructions before using the appliance.
Quali cation: Apart from the detailed instructions
by aprofessional, no special quali cation is necessary
forappliance using.
Minimum age:Persons over 16 years of age can
only workon the appliance.An exception includes
youngsters trained in order to reachknowledge
under supervision of the trainer duringoccupational
education.
Training:Using the appliance only requires corre-
spondingtraining by a professional or the Operating
Instructions. Nospecial training is necessary.
Emergency procedure
Conduct a  rst-aid procedure adequate to the injury
and summon quali ed medical attendance as quickly
as possible. Protect the injured person from further
harm and calm them down. For the sake of eventual
accident, inaccordance with DIN13164, a workplace
has to be  ttedwith a  rst-aid kit. It isessential to
replace any usedmaterial in the  rst-aid kitimmedia-
tely after it has been used. If you seek help,state the
following pieces ofinformation:
1. Accident site
2. Accident type
3. Number of injured persons
4. Injury type(s)
Maintenance
Treatment, maintenance and cleaning may only be
performed when the drive is o and the machine idle.
The drive must necessarily be turned o when the
machine is not working properly.
Check all screw and plug-in connections and protec-
tive equipment if  rm and tightened properly and
whether all moving parts are running smooth whene-
ver the appliance is to be put into operation.
Prior to every use, visually check the machine to rule
out any defects, in particular on the power cable and
the plug.
At all times, keep the machine, ventilation slots, in
particular, clean. Never spray water on the machine!
All moving parts should be treated with environmen-
tal-friendly oil. Never use any grease!
Repairs and works speci ed in these Instructions may
only be performed by quali ed authorised sta .
Safety instructions for bench drills
Danger of injury !
Never put your hands and feet near the rotating
parts.
Read carefully the operating and maintenance
instructions. Familiarise thoroughly with the controls
and proper use of the appliance. You need to know
how the appliance works and how controls can imme-
diately be switched o .
Never let children work with the appliance. Never let
adults work with the appliance unless they have been
properly trained.
Keep all persons, especially small children, and pets
out of reach of the place of your work.
Being careful prevents slipping or falling, especially
when reversing.
Do not adjust the appliance when the engine is
running (except for settings directly recommended by
the manufacturer).
Protective glasses or a shield should always be used
when operating, adjusting or repairing the appliance.
Wear close- tting clothes. Ties, jewels, long hair and
sleeves may get caught by the drill.
Device to be operated in a perfect state only. Inspect
the device visually every time it is to be used. Check
in particular the safety equipment, electrical controls,
electric cables and screwed connection for damage
and if tightened properly. Replace any damaged parts
before operating the device.
NEVER put your hands and  nger close to the drill bit.
DO NOT ATTEMPT to drill material with the surface
other than  at unless a suitable support is available.
NEVER switch the machine on while pressing the drill
bit against the material.
Before switching the machine on, MAKE SURE that the
bench-clamping lever is  rmly tightened.
MAKE SURE that the bit is  rmly clamped in the chuck.
Before switching the machine on, MAKE SURE that the
chuck key is removed.
USE A CLIP OR CLAMPING JAWS to secure the piece to
be drilled on the bench.
DON´T wear gloves when operating the drill.
Set the drill to speed answering a speci c job.
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude GTB 16-5 R - 55190 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude GTB 16-5 R - 55190 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 12,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info