625851
36
Zoom out
Zoom in
Previous page
1/37
Next page
• The straps so that the deflection of pressure against the belt midway between the two pulleys 10-13 mm.
• Make sure the pulleys of the coupling agent and each other. Place a straight edge to the pulley of the pathogen and move Sieden
engine until both pulleys are parallel.
• Remove the screw and nut assembly of the machine with a torque of 20.5 Nm attract.
Lubrication of the eccentric (Fig. 1 / 2)
• Remove belt
• 4 screws on the base plate solve (9)
• Remove base plate (10)
• exposed the eccentric with a suitable material lubricate.
Oil change (Fig. 1 / 2)
• Oil drain while the engine is warm
• essential requirements for the disposal of waste oil note, make sure that no oil in the soil reaches
• Remove oil bolt (20)
• oil in a suitable container can be phased out
• Oil screw screwing
• engine crankcase through the opening of the prescribed oil fill
• filler reseal
Air filter change (Fig. 1 / 2)
This engine is equipped with a dual-element air filter fitted. Frequent cleaning of the carburetor air filter prevents malfunctions before.
NOTICE: NEVER run engine without air filter, because of serious engine damage. NEVER air filter with gasoline or other solvents to
clean low focal point, as this fire or explosion may result.
• air filter cover (16) removed. The item to remove and examine holes and cracks. Damaged item replacement.
• foam element in warm water and mild detergents to some eagerness. Thoroughly rinse with clean water. Element dry. Element in
clean engine oil and soak excess oil express.
Inspection and Maintenance Schedule
Just before
start
After initial 20 hrs Every 2 weeks or
50 hrs
Monthly or every
100 hrs
Annually or 300
hrs
Check on fuel
level/condition
X
Engine oil check
X
Fuel piping check
X
Check on air filter,
replacement of the filter
if necessary
X
Check on and
adjustment of V-belt
X X
Air filter cleaning X
Change of engine oil X X
Cooler cleaning X
Ignition plug cleaning
and check
X
Exhaust system check X
External screw
tightening
X
36
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude GRP 2500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude GRP 2500 in the language / languages: English, German as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info