Manual Gude 36 KS 95660 (page 30 of 124) (English, German, Dutch, French, Italian)

623595

Zoom out

Zoom in

1/124

• When cutting a tense branch, be sure to know

that the branch will bounce back. If tension in the

wood bres gets released, the tense branch may

hit the operator and/or cause a loss of control over

the chainsaw.

• Be especially careful when cutting scrubs

and saplings. Thin material may get caught in

the chainsaw and hit you or you may lose your

balance.

• Carry the chainsaw by the front handle in a

switched-o condition and the saw chain must be

deected from your body. Fit a protection cover on

the chainsaw whenever it is transported or stored.

Careful chainsaw treatment reduces the likelihood of

an accidental contact with the running saw chain.

• Follow the lubrication, chain tension and

accessory equipment replacement instructions.

A chain that is not tightened or lubricated in a

professional manner may crack or increase the risk

of backlash.

• Keep the handles dry, clean and with no oil and

fat. Handles dirty with fat or oil are slippery and

lead to loss of control.

• Wood to be cut only. Do not use the chainsaw

for works for which it has not been designed –

example: do not use the chainsaw to cut plastic

material, masonry or building materials not

made of wood. Using the chainsaw for works that

are in conict with the designation may lead to

dangerous situations.

Backlash causes and prevention:

Backlash may take place when the saw bar point

touches an item or when the wood bends and the

saw chain gets stuck in the cutting.

In many cases, a contact with the bar point may lead

to a situation when the operator unexpectedly bends

backward and the bar is ejected upward toward the

operator as a result.

Sticking of the saw chain on the upper edge of the

bar may throw the bar intensely o toward the

operator.

Each such reaction may lead to losing control over the

saw and you may get seriously injured. Do not fully

rely on the safety equipment tted in the chain

saw. As the chainsaw user, you should take various

measures to be able to work without any accident

and injury.

Back impact is a result of an improper or wrong use

of power tools. This can be prevented by appropriate

preventive measures, as described below:

• Hold the saw rmly with both hands; clamp

the chainsaw handle with thumbs and ngers.

Position your body and arms so that you could

absorb the back impact. If appropriate measures

are taken, the operator is able to control the back

impact force. Never drop the chainsaw.

• Avoid abnormal body posture and do not cut

above the shoulder level. This will prevent a

contact with the bar point and the chainsaw will

be controlled better in unexpected situations.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharpcutting edges

are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits

etc. in accordance with theseinstructions,

taking into account the working conditions and

the work to beperformed. Use of the power

tool for operations dierent from those intended

couldresult in a hazardous situation.

5) Using and treatment of cordless tools.

a) Charge the batteries only in chargers recom-

mended by the manufacturer. Risk of re for a

charger suitable only for a certain type of batteries

or, as appropriate, accumulators, if used for other

accumulators.

b) Use only such accumulators in this electric

appliance that have been designed for this

appliance. Use of other accumulators may lead to

injuries and risk of re.

c) Do not leave an accumulator not being used

near oce clips, coins, keys, nails, screws or

other small metal items that could cause con

tact bridging. Short circuit between accumulator

contacts may result in burns or re.

d) Liquid may leak from an accumulator if used

improperly. Prevent contact with such liquid.

Rinse an aected body part with water in case

of accidental contact. If liquid gets to your eye,

seek medical advice.Liquid leaking from a battery

may cause skin irritation or burns.

6) Service

a) Have your power tool serviced by a qualied

repair person using only identicalreplacement

parts. This will ensure that the safety of the power

tool is maintained.

Safety instructions for Battery

Operated Chain Saw

• A moment of inattention when working with the

chainsaw is able to cause the saw chain to catch

your clothes or parts of your body.

• Use your right hand to hold the chainsaw by its

rear handle and your left hand to hold it by its

front handle. Holding the chainsaw the opposite

way increases the risk of injury and you must not

do that.

• Wear protective glasses and ear protectors.

Further, wearing head, hand and leg protection

equipment is recommended. Suitable protective

clothing minimises the risk of injury by thrown-

away wood chips and possible contact with the

saw chain.

• Do not work on trees with the chainsaw. There is

a risk of injury when working on a tree.

• Provide safe posture at all times and use the

chainsaw only when standing on a solid, safe and

level surface. A slippery or unstable surface, such as

ladder, may lead to loss of balance or loss of control

over the chainsaw.

ENGLISH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gude 36 KS 95660 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 2,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gude 36 KS 95660 Manual

Product: