623595

Gude 36 KS 95660 Manual

29
Zoom out
Zoom in
Previous page
1/124
Next page
25
GB
MAX. 40°C
Protect the battery against temperatures
above 40°C.
Li-Ion
Do not throw the batteries in household
waste.
Deliver the batteries to a collection centre of
old batteries where they will be recycled in
an environmentally friendly way.
General Power Tool Safety Warnings
WARNING
Read all safety warnings and all instructions.Failure
to follow the warningsand instructions may result in
electric shock, re and/or serious injury. Save all war-
nings and instructions for future reference.
The term „power tool“ in the warnings refers to your
mains-operated (cordepower tool orbattery-opera
-
ted (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive atmos
-
pheres, such as in the presence ofammable
liquids, gases or dust. Power tools create sparks
which may ignite thedust or fumes.
c) Keep children and bystanders away while ope
-
rating a power tool.Distractions cancause you to
lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do notuse any
adapter plugs with earthed (groundepower
tools. Unmodied plugs andmatching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators,ranges and refri
-
gerators. There is an increased risk of electric shock if
your body isearthed or grounded.
c) Do not expose power tools to rain or wet con
-
ditions. Water entering a power toolwill increase
the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging thepower tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damagedor entangled cords
increase the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable foroutdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual currentdevice
(RCprotected supply. Use of an RCD reduces the
risk of electric shock.
3) Personal safety
a) Soyez attentif, faites attention à ce que vous
faites et faites preuve de bon sens lors de
l‘utilisation de l‘appareil électrique. N‘utilisez
jamais l‘appareil électrique si vous êtes fatigué,
sous eet de drogues, d‘alcool ou de médica
-
ments. A moment of inattention while operating
power toolsmay result in serious personal injury.
b) Use personal protective equipment. Always
wear eye protection. Protectiveequipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protectionused for appropriate conditions
will reduce personal injuries.
c) Prevent unintentional starting. Ensure the
switch is in the o-position beforeconnecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with
your nger on the switch or energising power tools
that havethe switch on invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on. A wrenchor a key left
attached to a rotating part of the power tool may
result in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times. This enables bettercontrol
of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothingand gloves
away from moving parts. Loose clothes, jewelle
-
ry or long hair can becaught in moving parts.
g) If devices are provided for the connection of
dust extraction and collectionfacilities, ensure
these are connected and properly used. Use of
dust collection canreduce dust-related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct po
-
wer tool for your application.
Thecorrect power
tool will do the job better and safer at the rate for
which it was designed.
b) Do not use the power tool if the switch does not
turn it on and o. Any power toolthat cannot be
controlled with the switch is dangerous and must
be repaired.
c) Disconnect the plug from the power source
and/or the battery pack from thepower tool
before making any adjustments, changing
accessories, or storingpower tools. Such pre
-
ventive safety measures reduce the risk of starting
the powertool accidentally.
d) Store idle power tools out of the reach of child-
ren and do not allow personsunfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users.
e) Treat electric tools carefully. Check whether the
moving parts work perfectly and do not drag,
whether not broken or damaged to such an
extent that functioning of electric tools could
be aected. Have any damaged parts repaired
before using the machine. Many accidentsare
caused by poorly maintained power tools.
ENGLISH
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude 36 KS 95660 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude 36 KS 95660 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 2,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info