644682

Greenworks 2200607 - 80V Pro Manual

19
Zoom out
Zoom in
Previous page
1/214
Next page
EN
FR DE ES IT PT NL SV DA NO FI HU CS RU RO PL SL HR ET LT LV SK BG
English (Original instructions)
mm thick, or hose obviously too large to feed into he
cutting blade. Use a non-powered hand saw or pruning
saw to trim large stems.
If desired, you can use a string to help cut your hedge
level. Decide how high you want the hedge. Then,
stretch a piece of string along the hedge at this height.
Trim he hedge just above this guide line of string. See
Figure 5. Trim the side of a hedge so that it will be
slightly narrower at the top. See Figure 6. More of he
hedge will be exposed when shaped this way, and it
will be more uniform. If blades do become jammed,
stop the motor, allow the blades to stop and remove
the battery pack before attempting to remove he
obstruc ion.
Wear gloves when trimming thorny or prickly growth.
When trimming new growth, use a wide sweeping
action, so that the stems are fed direc ly into the cutting
blade. Older growth will have thicker stems and will be
trimmed easiest by using a sawing movement.
DanGer
If blade jams on any electrical cord or line, DO NOT
TOUCH THE BLADE! IT CAN BECOME ELECTRICALLY
LIVE AND VERY DANGEROUS. Continue to hold the
hedge trimmer by the insulated rear handle or lay it
down and away from you in a safe manner. Disconnect
the electrical service to the damaged line or cord before
attempting to free the blade from the line or cord. Failure
to heed his warning will result in serious personal injury
or possible death.
WarninG
Clear the area to be cut before each use. Re-move all
objects such as cords, lights, wire, or string which can
become entangled in the cutting blade and create a risk
of serious personal injury.
WarninG
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types
of commercial solvents and may be damaged by their
use. Use a clean cloth to remove dirt, oil,grease, etc.
When servicing use only iden ical Greenworks Tools
replacement parts. Use of any other parts can create a
hazard or cause product damage.
Caution
Do not at any time let brake uids, gasoline, petroleum
based products, penetrating oils, etc., come in contact
with plastic parts. They contain chemicals that may
damage, weaken, or destroy plas ics.
MaintenanCe anD repair
BlaDe MaintenanCe – HeDGe triMMer
WarninG
Battery units do not have to be plugged into an electrical
outlet; therefore, they are always in operating condition.
To prevent serious personal injury, always remove
the battery and take extra precautions and care when
performing maintenance, service or for changing the
cutting blade.
WarninG
To prevent serious personal injury, remove he battery
pack before servicing, cleaning, or removing material
from the unit.
BlaDe Care
Lubricate the cutting blades after each use.
Periodically inspect the blades for damage and wear.
Always use the manufacturer's specified replacement
blades.
to luBriCate BlaDe See figure 7.
Remove battery pack from hedge trimmer.
For easier operation and longer blade life, lubricate the
hedge trimmer blade before and after each use. Before
lubricating, remove the battery pack and lay hedge
trimmer on a flat surface. Apply light weight machine oil
along the edge of the top blade.
Occasionally, you should oil your hedge trimmer during
prolonged use. Before oiling, stop hedge trimmer,
remove battery pack, then oil. You then can resume
trimming. Do not oil while hedge trimmer is running.
HeDGe triMMer luBriCation
All of the bearings in this tool are lubricated with a
sufficient amount of high-grade lubricant for the life of
the unit under normal operating procedures. Therefore,
no fur her lubrication is required.
16
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Greenworks 2200607 - 80V Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Greenworks 2200607 - 80V Pro in the language / languages: All languages as an attachment in your email.

The manual is 23,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info