644682

Greenworks 2200607 - 80V Pro Manual

18
Zoom out
Zoom in
Previous page
1/214
Next page
EN
FR DE ES IT PT NL SV DA NO FI HU CS RU RO PL SL HR ET LT LV SK BG
English (Original instructions)
speCifiCations
Model 2200607
Voltage 80 volts
No load speed 3400 (±10%) SPM
Blade speed 3400 (±10%) SPM
Blade length 26" (66cm)
Cutting capacity 33mm
Measuered sound
pressure level
83 dB (A)
Guaranteed sound power
level
96 dB (A)
Vibration level Ah: 3.5m/s
2
, k:1.5m/s
2
Weight with battery pack 5.5kg
DesCription
1. Blade cover
2. Blade
3. Guard
4. Micro Switch
5. Front handle
6. Rotate release
7. Trigger Switch
8. On/off power button
9. Anti-jamming button
operation
For complete charging instructions, refer to the Operator’s
Manuals for your battery pack and charger models.
note: To avoid serious personal injury, always remove he
battery pack and keep hands clear of the lock-out button
when carrying or transporting the tool.
install BatterY paCK
Place the battery pack in the hedge trimmer. Align
raised rib on battery pack with groove in hedge
trimmer. See figure 2.
Make sure the latch on the battery pack snaps in place
and that battery pack is secured in hedge trimmer
before beginning operation.
reMove BatterY paCK
Locate the latch on the battery pack and depress to
release the battery pack from the hedge trimmer. See
Figure 2.
Remove battery pack from the hedge trimmer.
Caution
When placing battery pack in your hedge trimmer,
be sure raised rib on battery pack aligns with groove
in hedge trimmer and latch snaps in place properly.
Improper assembly of battery pack can cause damage
to internal components.
startinG tHe HeDGe triMMer See figure 3
Remove the blade cover.
Push he power button (I/O) to turn the unit on.
For added safety, there is a micro switch (4) in the front
handle. When operating, hold the trimmer with both
hands, one hand to squeeze the micro switch, and he
o her hand to squeeze the trigger switch (7).
stoppinG tHe HeDGe triMMer
Release the micro switch and trigger to stop the hedge
trimmer.
Press the power button to turn off the hedge trimmer.
Remove battery pack from the hedge trimmer.
usinG tHe rotatinG rear HanDle See figure 4.
Place the hedge trimmer on a flat and even surface.
Make sure that you released the trigger.
Pull the rotation lever (6) and begin turning the rear
handle. Release the rota ion lever and turn the handle
90 degrees to either side until it clicks into place and
the lever locks in.
To turn the handle back to center, pull the rotation lever
again, turn the handle slightly, release the rotation lever
and continue turning he handle until it locks into place.
anti-JaMMinG funCtion
If the branch is blocked in the blade, press the anti-
jamming button on the control panel, the blade will reverse
twice, and the branch should be released.
operatinG tips
Do not force the hedge trimmer through heavy
shrubbery. This can cause the blades to bind and slow
down. If the blades slow down, reduce the pace.
Do not try to cut stems or twigs that are larger than 15
15
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Greenworks 2200607 - 80V Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Greenworks 2200607 - 80V Pro in the language / languages: All languages as an attachment in your email.

The manual is 23,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info