637244
4
Zoom out
Zoom in
Previous page
1/6
Next page
Throttle stick
GRAUPNER GmbH & Co. KG
D-73230 KIRCHHEIM/TECK GERMANY
Liability for printing errors excluded.
We reserve the right to introduce modifications. PN.KC-01
Preparing the speed control for use:
Set the throttle servo travel to 100% at the transmitter,
set the trim to neutral, and connect the speed control
to the receiver. Ensure that the speed control switch is
set to “OFF” before you connect the battery to it.
Switch on the transmitter, and only then the speed
control.
Throttle stick
Full
Throttle
Programming the speed control:
1. Set the throttle reverse switch to
the “normal” position.
2. Move the throttle stick to “neutral”,
wait (about 1 sec.) until the green
LED is lighting. Thus the neutral
position has been saved.
3. Move the throttle lever to the full-
throttle position. The red LED lights
up to indicate the full-throttle
position.
4. Now move the throttle stick to the
full brake / full reverse position. The
red and green LEDs light up to in-
dicate that it the full brake / full
reverse position.
5. Now return the throttle stick to the
neutral position.
Specification
Operating voltage: 7,2 ... 12 V (6-10 cells)
Functions: forward / neutral / brake /
reverse
Frequency: 1 kHz
Peak current: 200 A
Continuous current: 40 A
BEC: 5 V/1,5 A
Recommended motor: min. 12 turns
Temperature cut-off: yes
Dimensions approx.: 42 x 38 x 16 mm
Weight: 65 g
Throttle stick
Throttle stick
Full
reverse
Receiver
Motor
Battery
On/Off
Switch
black=batt.-
blue
=
motor -
white = motor +
red = battery +
40R
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner SPEED PROFI 40R - 7196 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner SPEED PROFI 40R - 7196 in the language / languages: English, German, French as an attachment in your email.

The manual is 0,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info