603660
10
Zoom out
Zoom in
Previous page
1/14
Next page
10
Hob control elements
for
both left cooking zones
Cooking time function
For both left cooking zones the cooking time can be set. When the countdown
cooking time expired the gas on selected burner is turned off.
Cooking time can be set from 1 to 99 minutes.
Time function settings
Turn on the gas cooking zone.
Touch with finger the sensor key on the knob for around 2 seconds. The
number „-00+“ appear on display and also a short tone.
By pressing the + and – key set the desired cooking time. At beginning the step is
1 minute and when pressing the longer time change to 10 minutes step. If the first
press is on „-„ key then the value go on number „99“ and then decreases.
When set the desirous time, after 5 seconds the „- and +“ disappears and
countdown start.
When the value drops to 00 then starts blinking and acoustic sound is appearing.
Gas burner is shut down. Acoustic signal is switched off when you press any key
or after one minute shuts of itself.
Change the setting value
Touch the sensor key for around 2 seconds. On display appear „+ and –„. Now
you can change the setting.
Early switch off the time
At early switch off the gas flow is not interrupted.
You can turn off in different ways:
Set the setting by „-„ key to value „00“.
or
Simultaneously press the + and – buttons for around 2 seconds.
Value moves to 00.
By touching the sensor key for 2 seconds, the setting erases.
WARNING: In case of electrical blackout, the timer turns off, but the flame is
still on.
Ignition and operation of
the burners
User’s instructions
This appliance must be used for the purpose it was designed for, i.e. domestic
cooking. Any other use is considered to be improper and therefore dangerous.
The manufacturer will accept no liability for any damage caused by improper,
incorrect or irrational use.
Using the burners
If the burners are not used for several days, wait a few seconds before lighting
them in order to release any air from the pipes.
As the cook top burners are fitted with an automatic ignition, to light them simply
press and turn the handle to the small star. The appliance uses a spark ignition
generator.
If the flame does not ignite within five seconds, turn the knob back to the 0 position
and repeat the procedure; if the electric ignition should not work due to a power
failure or damp spark plugs, the gas can also be ignited using a match or a gas
lighter.
For models with a safety tap (which interrupt the gas flow should the flame
accidentally go out) the burners are ignited as described above, but ensure the
knob is pressed in for 5 to 6 seconds after the flame has ignited. After this
time, which gives the safety device enough time to cut-in, the flame will be on
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje GKT6SY2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje GKT6SY2 in the language / languages: English as an attachment in your email.

The manual is 2,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info