656034
7
Zoom out
Zoom in
Previous page
1/8
Next page
- 12 -- 11 -
beam and buzzer, as well as trigger the flash.
To control the flash wirelessly, you need a Godox FT
series remote control set (on-camera and on-flash). Insert its
receive end into the Wireless Control Port (6) on the flash
and insert the transmit end into the camera hot shoe.
Settings made on the hotshoe-mounted transmit and receive
ends will be wirelessly communicated to the flash. Then you can press thecamera
shutter-release button to trigger the flash. Youcan also hold the transmit end at hand
to control your off-camera flash.
 When the flash unit receives wireless signals, is shown on the LCD display.
 For full instructions on the use of FT series remotecontrol, see its user manual.
12. Sync Triggering
The Sync Cord Jack (7) is a Φ2.5mm plug. Insert a trigger plug here and the flash
will be fired synchronously with the camera shutter.
13. Custom Function----Sleep Function
This product is equipped with Sleep Function to avoid battery drain when the flash
unit is idle.
Press <  > button and hold for 2 seconds to enter the Sleep Function Mode.
The LCD panel displays “SL” (Sleep) and “Sleeping Time”. Idle time before entering
Sleep Mode is 10 minutes by default. Rotate Select Dial (14) to set a desired time for
the flash or to turn off Sleep Function. Press < > button to return.
Fn
ZOOM
When the flash enters sleep mode, the LCD panel displays a “”icon.
To wake up the flash unit, press any button on the flash unit, or press the camera
release button, or press the trigger TEST button.
Note:The idle time before entering Sleep Mode is recommended to set short. This can ensure
a longer battery life.
Protection Function
with all shutter speeds of cameras (max. 1/8000 second, up to your camera). This is
convenient when you want to use aperture priority for fill-flash portraits.
Note:
* Hi-speed sync triggering mode is effective only when the flash unit is used together with hi-
speed sync trigger, e.g., Godox Cells II transceiver.
* Hi-speed sync triggering mode is not available when the flash unit is mounted onto the camera
hotshoe.
Number of flashes that will activate over-temperature protection in high-speed
sync triggering mode:
To avoid overheating or deteriorating the flash head during high speed sync flash, the
over-temperature protection function will be activated automatically after 15 continuous
high-speed flashes and the recycle time becomes 10 seconds longer.
9.Custom Function-----Focus Assist Lamp
Under poorly-lit or low-contrast conditions, you can press <> button (18) to
turn on the focus assist beam in order to make it easier to autofocus.
The beam will automatically get out certain seconds after the last pop is fired. The
time between the last fire and the auto shutdown of focus assist beam is called No-
Flash Time. The time is user adjustable and set to 10 seconds by default.
Press < > button and hold for 2 seconds to enter Custom Function. Then
press “SET” button to enter “FC” mode. The LCD panel displays “FC”(Auto shutdown
of focus assist lamp) and “No-Flash Time”. Rotate Select Dial (14) to set a desired
time for the flash. Press <  > button to return.
10. Buzz Function
To turn the buzz function on or off, press <> button (13) and hold for 2 seconds.
When the buzzer is turned on, is shown on the LCD display.
11. Wireless Control Function
The flash unit is built in with a Wireless Control Port (6) so that you can wirelessly
adjust the power level of the flash and control the on-or-off of your flash, focus assist
1. Over-Temperature Protection
To avoid overheating and deteriorating the flash head, do not fire more than 30
continuous flashes in fast succession at 1/1 full power. After 30 continuous flashes,
allow a rest time of at least 10 minutes.
Idle Time
OF
3
10
30
60
Meaning
Sleep Function is turned off. The flash unit will not automatically enter sleep mode.
Idle time before entering Sleep Mode is set to 3 minutes.
Idle time before entering Sleep Mode is set to 10 minutes.
Idle time before entering Sleep Mode is set to 30 minutes.
Idle time before entering Sleep Mode is set to 60 minutes.
Fn
ZOOM
No-Flash Time
10 seconds
20 seconds
30 seconds
Meaning
10 seconds after the last fire, focus assist lamp will automatically get out.
20 seconds after the last fire, focus assist lamp will automatically get out.
30 seconds after the last fire, focus assist lamp will automatically get out.
Fn
ZOOM
Fn
ZOOM
Power Output
1/1
1/2(+0.3,+0.7)
1/4(+0.3,+0.7)
1/8(+0.3,+0.7)
Times
15
20
30
Power Output
1/16(+0.3,+0.7)
1/32(+0.3,+0.7)
1/64(+0.3,+0.7)
1/128(+0.3,+0.7)
Times
40
50
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Godox V850 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Godox V850 in the language / languages: English as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info