636444
6
Zoom out
Zoom in
Previous page
1/19
Next page
10 11
Installation
After the end of scanning use OK button and then the receiver will display
the rst scanned channel.
Use OK button on remote control to display channel list. Using / but-
tons choose a channel You want to watch and conrm your choice using
OK button.
2.3 First Scan 2.4 Automatic Power Down
2.5 Working with External USB Drive
2.6 Antenna Power Supply
After the conguration, use the blue button or OK on remote control to start
scanning TV and radio channels. It will not happen if your antenna is not con-
nected and properly congured.
In accordance with actual European Union requirements, your receiver is
equipped with function “Automatic Power O”. It works by switching the
receiver into standby mode after a period of 3 hours after the last active use.
In practice this means that if during this time the receiver will not be given
any command by using the remote control or keypad on the front panel,
the receiver turns o. Turning o the receiver will be preceded (2 minutes
previous) by a relevant message on the TV screen. Please also note that this
feature is enabled by default, but at your own request, you can disable it
using the appropriate functions in the receiver menu.
During the selection and operation with USB drive (HDD, ash drive), You
should pay attention to the following issues:
1. Drive is compatible with USB 2.0 and has appropriate write and read speed,
2. Drive contains one single partition, formatted in supported format,
3. If necessary, drive should be supplied from an external power supply
(especially for USB hard drives),
4. Do not disconnect the drive during a write/read data operation,
5. Do not use full or fragmented drive.
plug USB drive in here
If your antenna needs a +5V power supply - use MENU button to enter
the main menu and using / buttons enter Installation menu, select
Channel Scan and set Tuner Power ON and exit using MENU button. Next,
using cursor buttons select Auto Scan to scan all available channels.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Globo OPTICUM HD T90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Globo OPTICUM HD T90 in the language / languages: English as an attachment in your email.

The manual is 4,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info