Manual Globo HD XC1-01 (page 3 of 8) (English, German)

636445

Zoom out

Zoom in

1/8

Remote controller

Remote controller Basic connection Operating notes

Simple configuration

Quick Start

Digital Cable Receiver

• Slot for Smart Card

• Support of SD/HD (MPEG2 / MPEG4) DVB-C systems

• High definition video output - HDMI

• Standard resolution video output - RCA

• High speed USB 2.0 port

• Automatic Stand-by

• Low power consumption in Stand-by mode, below 1W

• Multilingual menu, including English

• Electronic Program Guide - EPG

Printed in Europe

Button Function

POWER—

Switch receiver on from standby

mode.

HDMI

Select video output resolution.

MUTE —

Enable or disable the audio.

Numeric

buttons

Select channel or enter

programming parameters.

Switch between Sleep Timer Off

10/30/60/90/120 minutes.

FAV

Set receiver to the favourite list

mode, display actual favorite

channel list.

Switch to the previous channel.

Display the Main Menu on the

screen or return to the previous

menu or status.

INFO

Display information bar of

current service.

EPG

Display Electronic Program

Guide on screen.

EXIT

Cancel the user selection and

return to the viewing mode from

the menu.

Button Function

Adjust volume level or move cursor left or right in the menu.

Change channel or move cursor up or down in the menu.

Display channel list on screen. Select an item in menu.

TV /

Switch receiver between TV and radio mode.

FIND

Enables to find channels by name entered by numeric buttons.

P- / P+

Move cursor to next or previous page.

HOME

Optional function.

MAILBOX

Optional function.

PVR

Optional function.

STATUS

Display receiver status window.

AUDIO

Audio channels setup.

TXT

Display teletext information.

SUB-T

Subtitles setup.

SLOW, SKIP-,

SKIP+, REW, FF,

PLAY, PAUSE,

STOP, REC

Video functions (mediaplayer).

RED, GREEN,

YELLOW, BLUE,

WHITE, BLACK

Colour buttons (different functions per menu).

Automatic Power Down

In accordance with actual European Union requirements, Your receiver is equipped with

function “Automatic Power Off”. It work by switching the receiver into standby mode

after a period of 3 hours after the last active use. In practice this means that if during this

time the receiver will not be given any command by using the remote control or keypad on

the front panel, the receiver turns off. Turning off the receiver will be preceded (2 minutes

previous) by a relevant message on the TV screen. Please also note that this feature is

enabled by deafault, but at Your own request, You can disable it using the appropriate

functions in the receiver menu.

Working with External USB Drive

During the selection and operation with USB drive (HDD, flash drive), You should pay

attention to the following issues:

• Drive is compatible with USB 2.0 and has appropriate write and read speed,

• Drive contain one single partition, formatted in suppoerted format,

• If nessesary, drive should be supplied from an external power supply (especially for USB

hard drives),

• Do not disconnect the drive during a write/read data operation,

• Do not use very full or fragmented drive.

After purchasing receiver, unpack it and

check if all of the following items are

included:

• Receiver

• Remote controller

• Quick Start manual

• Batteries - 2x AAA (optional)

To install batteries in the remote controller

remove the flap protecting the battery

chamber. If there are used batteries, they

must be removed. Put new batteries inside

according to polarity description drawn

inside. Place protecting flap on its original

position.

Model ID:XC1 MC/2013/09

(1) Connect cable from DVB-C socket to

receiver’s CABLE IN connector.

(2) Using HDMI cable connect receiver with

flat panel TV or

(3) Using RCA cable connect it with classic

TV.

(4) At the end connect main cord to the

main socket.

Turn on the TV Set. After a while on TV

Set You should see receiver’s OSD . If the

TV Set is not displaying receiver’s OSD,

probably signal source is set wrong. Check

TV Set documentation for information how

to change signal source.

After connecting and turning on the receiver, if there is no default channels list provided

by Your Operator, You can choose search settings and scan channels to setup Your own

channels list.

In the main menu (MENU button) using arrow buttons select Channel Scan submenu and

enter it using OK button. Use Auto Search or Quick Search to input parameters depending

on Your Operator cable network. If You do not have the parameters try Blindscan or

contact Your Operator.

ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH

Digital Cable Receiver

KP 07/2012

ModelID: X2

• Slot for Smart Card

• Support of SD/HD (MPEG2 / MPEG4) DVB-C systems

• High deﬁnion video output - HDMI

• Standard resoluon video output - SCART

• High speed USB 2.0 port

• PVR Ready

• Time Shi (pause, rewind)

• Automac Stand-by

• Low power consumpon in Stand-by mode,

below 1W

• Mullingual menu, including English

• Electronic Program Guide - EPG

• 4 digit LED display on front panel

• Mulmedia Player Full HD 1080p

Quick Start

1 2 3 4

Manual_XC1_01-REV04 (PL ENG RU DE).indd 3 2014-03-26 14:01:28

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Globo HD XC1-01 in the language / languages: English, German as an attachment in your email.

The manual is 1,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Globo HD XC1-01 Manual

Product: