606977
21
Zoom out
Zoom in
Previous page
1/24
Next page
8
Minimum ON period (t)
In order to prevent frequent relay switching, this parameter can be used
to specify the minimum ON period. This period specifies the minimum
amount of time for which the relay is to remain on when a request has
activated the relay.
1. The + and - buttons can be used to set this parameter in a range of
20 seconds to 500 seconds (8.3 minutes) in steps of 10 seconds.
2. S is used to save the set value.
A minimum ON period of 20 seconds is set in our works.
Sensor offset (o)
The measured actual temperature can be displaced by ±3.0 Kelvin by
means of this parameter. This correction can be used to compensate the
measuring deviations which arise though the unfavorable placing of the
room temperature controller.
1. The + and - buttons can be used to set the parameter.
2. S saves the parameter.
The value set here is always applied to the respective active sensor
(external or internal temperature sensor, depending on the operating
mode selected) which is used for the temperature control.
The sensor offset is set to 0.0 Kelvin in our works.
Heating optimisation (E)
The heating optimisation determines the temporal behaviour of the room
on the basis of the past heating processes and calculates the required
derivative action time which is necessary in order to reach the desired
setpoint temperature on time.
The automatic heating optimization can be activated (On) and deactivated
(OFF) here. If the heating optimisation is deactivated, switching is carried
out exactly as specified in the time program.
1. The + button can be used to set the heating optimisation to On and
the - button to OFF.
2. S saves the setting.
The heating optimisation is activated (On) in our works
Gradient for heating optimisation (r)
The current gradient which is used to calculate the derivative action time
can be checked under this menu item. The time required to heat the room
by one Kelvin (1K) is displayed here in minutes.
If the heat optimisation is activated, this gradient is always recalculated
during a transition from a lowering phase to a comfort phase.
The heating optimisation is set to a gradient of 15 minutes per Kelvin in
our works.
Summertime regulation (S)
The summertime regulation with which the changeover from normal to
summertime and vice versa is to be calculated can be selected here. The
room temperature controller differentiates between Central Europe and
Great Britain.
1. The + and - buttons can be used to change to one of the operating
modes listed below.
2. S activates it.
* Preset in our works
Regulation for Summertime
beginning
Summertime end Display
Central Europe Last Sunday in
March from 2:00 h
to 3:00 h
Last Sunday in
October from 3:00 h
to 2:00 h
EUr*
Great Britain Last Sunday in
March from 2:00 h
to 3:00 h
Fourth Sunday in
October from 3:00 h
to 2:00 h
Gb
Off --- --- OFF
i
Information on the summertime function
If the summertime function is deactivated (OFF), an automatic
changeover of the time is not carried out. Note that the time has to be
changed over manually in this case.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gira 0389 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gira 0389 in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gira 0389

Gira 0389 User Manual - German - 24 pages

Gira 0389 User Manual - Dutch - 24 pages

Gira 0389 User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info