606977
20
Zoom out
Zoom in
Previous page
1/24
Next page
7
Normal display (n)
This parameter is used to select the normal display of the controlling
device. This information is always displayed on the display whenever no
menu has been selected and no holiday settings are active.
1. The + and - buttons can be used to change to one of the operating
modes listed below.
2. S activates it.
* Preset in our works
Operating mode (b)
This parameter allows individual selection of the function for the room
temperature controller. This is used to specify the sensor selection for
temperature controlling, the mode of operation (heating/cooling) and the
limiting function.
1. The + and - buttons can be used to change to one of the operating
modes listed below.
2. S activates it.
* Preset in our works
Differential gap (d)
This parameter defines the differential gap (hysteresis) of the controlling
function.
1. The + and - buttons can be used to select the value.
2. S activates the value.
The relay is switched off if the current temperature lies over the setpoint
temperature by the value set here (Heating operating mode).
The relay is activated again if the actual temperature lies below the
setpoint value by the value set here (Heating operating mode).
The switching difference is set in our works to ±0.2 °C
Limiting temperature (G)
This parameter allows the setting of an individual limitation of the floor
temperature. If the limiting function is activated (operating mode with
limiting function selected), the relay is deactivated as soon as the
temperature measured at the external sensor exceeds the temperature
set here (heating).
In cooling mode the relay is deactivated as soon as the measured
temperature lies below the set limiting temperature.
1. The + and - buttons can be used to set the limitation.
2. S activates the limitation.
The setting range amounts to +5 °C to +55 °C. The limiting temperature
is set in our works to +45 °C
The limiting function does not have a differential gap, so that switching is
carried out immediately if the value exceeds the upper or lower limit.
Temperature at the external sensor (F)
If an operating mode which requires an external sensor is selected, the
current temperature value is displayed under this menu item.
No change can be carried out at this value.
If an operating mode which only operates with the internal sensor is
selected, "--.--" is displayed.
Normal display Display
Current time of day Clock *
Current setpoint temperature SETPOINT
Current actual temperature Actual
Reference
variable
Operating
mode
Floor temperature limit Display
Internal sensor Heating --- I.H*
Internal sensor Cooling External sensor
IE.C
External sensor Cooling --- E.C
Internal sensor Cooling --- I.C
Internal sensor Heating External sensor IE.H
External sensor Heating --- E.H
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gira 0389 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gira 0389 in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gira 0389

Gira 0389 User Manual - German - 24 pages

Gira 0389 User Manual - Dutch - 24 pages

Gira 0389 User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info