783834
2
Zoom out
Zoom in
Previous page
1/35
Next page
37
Dear Customer,
Thank you for purchasing this quality product. Please read the manual very carefully
before using this device. Failure to follow these instructions can cause measuring
abnormality or damage to the Oximeter.
No part of this manual may be photocopied, reproduced or translated into another
language without the prior written consent. We reserve the right to revise and amend
it at any time without prior notice.
Version of the Manual: Ver 1.5
Issued Date: May 8, 2019
All rights reserved.
Notes:
The contents contained in this manual are subject to change without prior notice.
Information furnished by Creative is believed to be accurate and reliable. However,
no responsibility is assumed by Creative for its use, or any infringements of patents
or other rights of third parties that may result from its use.
Instructions for Safe Operation
Check the device to make sure that there is no visible damage that may affect user’s
safety and measurement performance. It is recommended that the device should be
inspected minimally before each use. If there is obvious damage, stop using the de-
vice.
Necessary service must be performed only by qualified technicians. Users are not
permitted to service this device.
The oximeter must not be used with the devices and accessories not specified in
User Manual.
Warnings
Explosive hazard—DO NOT use the oximeter in environment with inammable gas
such as some ignitable anesthetic agents.
DO NOT use the oximeter while the Patient is under MRI or CT scanning. This
device is NOT MRI Compatible.
Cautions
Discomfort or pain may occur if using the sensor of this device continuously on the
same location for a long time, especially for the patients with poor microcirculation.
It is recommended that the Oximeter should not be applied to the same location
for longer than 2 hours or less if any abnormal condition is found. Frequently check
and re-position the Oximeter sensor.
Misapplication of a
SpO2
probe with excessive pressure for prolonged periods can
induce pressure injury.
Place the
SpO2
probe on the nger tightly will cause venous pulse and effect blood
circulation, and lead to interstitial edema, hypoxia and inaccurate measurement.
Biocompatibility tests have been performed on all the applied parts, some excep-
ENGLISH
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gima OXY 110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gima OXY 110 in the language / languages: English as an attachment in your email.

The manual is 2.83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gima OXY 110

Gima OXY 110 User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info