479857
5
Zoom out
Zoom in
Previous page
1/10
Next page
ULTRASONIC MODULE DESCRIPTION
GEMINI ref. 5123.
The ultrasonic module ref. 5123 protects the vehicle, detecting the door opening or the movements inside the passengers
compartment.
FITTING INSTRUCTIONS.
Connect the ultrasonic module to the alarm system wiring harness by the black four ways AMP connector, then
insert the connectors of the ultrasonic cells in the suitable socket : RED for the TX cell and WHITE for the RX cell.
VERY IMPORTANT !!
To meet the insurance requirements the Ultrasonic Volumetric Module ( ref. 5123 ) and the related
connectors ( AMP two ways US cells connectors and AMP four way US power supply connector ) must
be fitted in order to avoid an easier disconnection from the alarm harness of the above mentioned items (
e.g. : pulling the wires or the US module ).
To obtain this protection is mandatory to fit the Ultrasonic Volumetric Module and the related connectors by
some plastic clamps on the harness coming from the alarm unit ( under the vehicle dashboard ).
For more details, please, refer to the following diagrams.
SENSITIVITY ADJUSTMENT.
1. Lower one of the front windows ( approximately 20 cm ).
2. Adjust the ultrasonic sensor sensitivity to a minimum level.
3. Arm the alarm system and then switch off the external sensor input, ( see the "EXTERNAL SENSOR INPUT / ALARM
ARMED POSITIVE OUTPUT OVERRIDE" chapter ).
4. Insert one hand through the open window and move it, if the sensitivity is properly adjusted the LED located on the
sensor case will be lighted. Otherwise increase the sensitivity level.
TECHNICAL DATA
Power Supply 9-16 VDC
Current consumption ( system armed with ref.5123
sensor )
16mA - after the neutral time
Current consumption ( system disarmed ) 7mA
Working temperature -30°+ 85°C
Engine immobilisation relay contacts max current 10A a 20°C
Direction lights and CDL relay contacts max current 10A a 20°C
Siren audible level at 1 meter - SPL > 118dBA
Radio receiver range 20 m
External module output power supply 12 VDC
Max current level available on the external module
output
300mA
IMPORTANT
The plastic case of this alarm system is water resistant, but to avoid any damaging do not steam clean
directly to the unit.
This vehicle security system is guaranteed against any manufacturing or functioning fault for 12 months from purchase date and for a
maximum of 24 months from manufacturing date. The manufacturer declines every responsibility for any defect or failure to the device and
to the electric plant of the vehicle due to an incorrect installation or to the alteration of the tec hnical data stated in this manual. This vehicle
security system has only a dissuasive function against possible thefts.
TX RX
Pink
Brown
Green-Black
Ultrasonic module
Red
connector
White
connector
!! VERY IMPORTANT !!
TX
RX
Ultrasonic module
CLAMP
HARNESS
CLAMP
CLAMP
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gemini 7350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gemini 7350 in the language / languages: English as an attachment in your email.

The manual is 1,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info