479837
2
Zoom out
Zoom in
Previous page
1/9
Next page
DESCRIPTION
GEMINI 7060
The system 7060 is an alarm unit that can be installed on vehicles with 12 volts battery (negative earth).
FUNCTIONS
- Remote controlled alarm unit with dynamic code.
- Blinker, universal central door locking control, electric windows and sunroof closure for selected vehicles
equipped with “Pack Comfort” system.
- Perimetric protection and outlet for additional modules.
- Controls for self-powered siren, additional siren (continuous or alternate sound) and horn.
- LED’s Memory.
- Acoustic activation/de-activation (through siren or horn).
- Remote controlled panic function and / or boot opening.
- Electric engine immobilisation.
- Alarm unit functions programmable through the transmitter.
The unit is equipped with two 2-channel transmitters (art. 7208E), frequency 433.92 Mhz.
USEFUL SUGGESTIONS FOR THE INSTALLATION
- Connect the positive and negative feeding wire of the alarm system to the battery.
- Connect always the alarm Green-Brown wire to the door pin switch.
- On catalysed vehicles the engine immobilisation must be carried out on the fuel pump and the starter motor.
- Avoid routing connection wires next to interference sources.
- The ultrasonic heads must be positioned at the top of each windscreen pillar and must be pointing at each
opposite diagonal corner away from the facia outlets.
WIRING CONNECTIONS
Disconnect the negative terminal of the battery and only re-connect after the installation is complete.
FUNCTION WIRE COLOR
Earth ðð BROWN
Battery positive terminal ðð RED
Engine immobilisation (max. 10 A) ðð 2 X GREY
Ignition live ðð YELLOW
Direction indicator lights ðð 2 x ORANGE
Door pin switch ðð GREEN-BROWN
Boot/bonnet pin switches ðð GREEN
Positive alarm armed ðð PINK
External sensors inlet ðð GREEN-BLACK
Self-powered siren control ðð BLUE
Common +/- siren or klaxon ðð BLACK
Additional siren or horn control ðð YELLOW-BLACK
Negative control boot opening ðð GREY-BLACK
Comfort ðð WHITE-BLACK
Central door locking ðð
YELLOW-BLUE, RED-BLUE, YELLOW-GREY,
RED-GREY, YELLOW-BROWN, RED-BROWN
Note: The wiring harness has 2 connectors: connect the 2-pin connector to the LED and the 4-pin
connector to an additional module (shock, ultrasonic or super-high frequency module).
"DIP SWITCHES PROGRAMMING TABLE"
1 OFF Comfort POSITIVE
2 ON Comfort NEGATIVE
2 OFF Automatic arming OFF
2 ON Automatic arming ON
3 OFF Self-learning of a new code OFF (normal use)
3 ON Self-learning of a new code ON
4 OFF Closure short * period
4 ON Closure 6 seconds
* THE SHORT TIME IS SET FROM THE PROGRAMMING WITH THE TWO-CHANNELS TRANSMITTER
BETWEEN 0,5 SECONDS AND 1 SECOND.
ATTENTION: SET THE DIP SWITCHES BEVOR FEEDING THE 7060 UNIT.
TABLE OF PROGRAMMABLE FUNCTIONS THROUGH THE TWO-CHANNELS TRANSMITTER.
ACTIONS
ALARM CONDITION
VISIBLE
ACTIONS
LED FLASHING AND
SELECTED FUNCTIONS
ALTERNATIVE
ACTIONS
POWER OFF Alarm OFF - - -
Turn the ignition
key to ON
Alarm OFF
-
-
-
FEED THE UNIT
7060
Alarm ON
-
-
-
Press on the
transmitter 1 button
within 10 seconds
Access to the Set-up 1 function:
Supplementary siren
One blinker
flashing
One flashing = continuous
Two flashing = intermittent
Press on the
transmitter 1 button
Access to the Set-up 2 function:
acoustic signalling with
supplementary siren 725
Two blinker
flashing
One flashing = de-activated
Two flashing = activated
Press on the
transmitter 1 button
Access to the Set-up 3 function:
Panic and boot opening through
the transmitter
Three
blinker
flashing
One flashing = Panic and
additional siren
Two flashing = Boot opening
Press on the
transmitter 1 button
Access to the Set-up 4 function:
boot opening while alarm armed
(Panic excluded)
Four blinker
flashing
One flashing =
While alarm disarmed
Two flashing =
For both functions
Press on the
transmitter 1 button
Access to the Set-up 5 function:
vehicle check while arming the
system
Five blinker
flashing
One flashing = de-activated
Two flashing = activated
Press on the
transmitter 1 button
Access to the Set-up 6 function:
closure control period
Six blinker
flashing
One flashing = 0,5 seconds
Two flashing = 1 seconds
Press on the
transmitter 1 button
Access to the Set-up 7 function:
Automatic arming with door
closure
Seven
blinker
flashing
One flashing = activated
Two flashing = de-activated
Press on the
transmitter 1 button
Access to the Set-up 8 function:
Comfort
Eight
blinker
flashing
One flashing = while closing
Two flashing = after the
closure
Press on the
transmitter
button N. 2 to
change the
selected option.
De-activate the
+15 to memorise
the selected
options and to
exit from User
set-up.
Turn the ignition
key to OFF
Set-up exit, normal working
of the alarm
- - -
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gemini 7060 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gemini 7060 in the language / languages: English as an attachment in your email.

The manual is 1,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info