801309
3
Zoom out
Zoom in
Previous page
1/22
Next page
You should mount the sonar module in a location where the LEDs are visible, where the cables can be
connected, and where the device will not be submerged.
Cable Considerations
NOTICE
Zip ties and cable clamps can over-tighten and damage or break the cable, or cause cable fatigue due to
repeated rotation of the motor.
You should use black electrical tape to secure the cable above and below the rotating joint. If you secure the
cable with zip ties, do not over-tighten the zip ties.
You should secure the cable above and below the pivot joint of your trolling motor.
You should create a service loop at least 25cm (10in.) long in the cable, with the rotating joint centered on the
loop.
Routing the Transducer Cable
You should test-fit the transducer and cable before installation.
1Allow a loose gap of at least 10cm ( 4in.) above
and 10cm (4in.) below the rotating joint
to create a loop in the cable. The loop must be
large enough to allow full rotation of the transducer
in both directions. Allow a minimum of 25cm (10in.)
of cable to cover the 20cm (8in.) section between
mounting points.
2Use black electrical tape to secure the transducer
cable to the shaft.
3Test the full rotation of the trolling motor to ensure
the cable clears the rotating joint and is not pulled
tight due to tension during rotation.
3
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin LIVESCOPE XR LVS62 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin LIVESCOPE XR LVS62 in the language / languages: English as an attachment in your email.

The manual is 4.09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin LIVESCOPE XR LVS62

Garmin LIVESCOPE XR LVS62 Installation Guide - German - 22 pages

Garmin LIVESCOPE XR LVS62 Installation Guide - Dutch - 22 pages

Garmin LIVESCOPE XR LVS62 Installation Guide - French - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info