801309
2
Zoom out
Zoom in
Previous page
1/22
Next page
Parts Bags
The installation hardware for the transducer is included in labeled bags. As you complete the installation
process, each procedure begins with a reference to the label on the parts bag needed to complete the
procedure. You can use this table to review or verify the parts bags needed for the installation procedures.
NOTE: You should leave all parts in the labeled bags until you are instructed to open a bag in the instructions.
Not all hardware is used for all installation types.
Contains parts needed when installing the perspective mount
Contains parts needed when installing the perspective or shaft mount
Contains parts needed when installing the perspective, shaft, or barrel mount
Contains parts needed when installing the barrel mount
Contains parts needed when installing the shaft mount
Contains the optional low-profile mounting screws
Mounting Considerations
NOTICE
The use of third-party or self-fabricated mounts could lead to transducer damage or loss. Damage or loss
sustained when using a third-party or self-fabricated mount is not covered under warranty.
Using the hardware supplied, you can mount the transducer on your trolling motor in one of three ways.
Perspective Mount (Installing the Transducer on the Perspective Mode Mount, page5)
You can mount the transducer on the trolling motor shaft using the perspective view mount and bracket.
When using the perspective view bracket, the transducer can be used for perspective, downward, and
forward views.
Barrel Mount (Installing the Transducer on a Trolling Motor Barrel, page9)
You can mount the transducer on either side of the trolling motor barrel.
When mounted on the barrel, the transducer can be used for downward and forward views.
When mounted on the barrel, the transducer cannot be used for perspective view.
Shaft Mount (Installing the Transducer on the Trolling Motor Shaft, page11)
You can mount the transducer on either side of the trolling motor shaft.
When mounted directly on the shaft, the transducer can be used for downward and forward views.
When mounted directly on the shaft, the transducer cannot be used for perspective view.
Mounting the transducer directly on the shaft allows a lower-profile installation than using the perspective-
mount bracket.
When planning the installation, you should observe these considerations.
You must angle the transducer correctly for the selected view to work properly.
Installing the transducer with the included knobs allows for tool-free transitions between sonar views.
You can use the included low-profile hardware instead of the knobs for a more permanent transducer view
position.
You should mount the transducer in a location where it will not be jarred when launching, hauling, or storing.
You must install the sonar module in a location with adequate ventilation where it will not be exposed to
extreme temperatures.
2
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin LIVESCOPE XR LVS62 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin LIVESCOPE XR LVS62 in the language / languages: English as an attachment in your email.

The manual is 4.09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Garmin LIVESCOPE XR LVS62

Garmin LIVESCOPE XR LVS62 Installation Guide - German - 22 pages

Garmin LIVESCOPE XR LVS62 Installation Guide - Dutch - 22 pages

Garmin LIVESCOPE XR LVS62 Installation Guide - French - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info