583731
21
Zoom out
Zoom in
Previous page
1/24
Next page
21
Flying the Missed Approach
The GNS 480 will automatically sequence to the missed approach. Fly the
heading legs manually. When the course leg becomes active, press the SUSP
key to “unsuspend” waypoint sequencing. You may reengage roll steering on
your autopilot. The GNS 480 will then fly the Hold Entry and Holding auto-
matically. Non-roll steering autopilots or manual flight may be accomplished
by flying to the CDI.
1. Follow the missed approach procedures, as published on your approach plate.
The GNS 480 guides you to the Missed
Approach Point holding pattern.
2. A message on the bottom of the
screen recommends entry procedures
for the holding pattern (i.e., “HOLD
DIRECT”, “HOLD PARALLEL”, or “HOLD
TEARDROP”). You may use the holding
pattern dashed magenta lines for
reference in manual flight. The hold is
automatically sized for a one minute
leg makes corrections for winds aloft with an AOC input. Roll steering-capable
autopilots will fly the hold and hold entry automatically.
3. The GNS 480 provides course guidance only on the inbound side of the
holding pattern. When leaving the holding pattern to re-fly the approach (or
another approach) press the PROC key to activate Vector To Final (VTF) mode
for vectors or for a full procedure direct to the airport using the Direct-To key.
Note: In the event that you wish to divert direct to another destination,
use the Destination (DEST) function on the Direct-To page.
Vectors To Final
When you are in the Terminal area, you may be directed to fly a vector
to final approach.
1. Press FN and then PROC.
2. Press VTF.
3. This extends the inbound course from the FAF for the intercept.
PROCEDURES (PROC)
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GNS 480 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GNS 480 in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info