583731
20
Zoom out
Zoom in
Previous page
1/24
Next page
20
Adding SIDs, STARs, and Approaches
SIDs are associated with the departure airport. STARs and IAPs are associated
with the destination airport.
After creating your flight plan, you can select an approach, departure, or arrival
procedure so the GNS 480 can guide you through the procedure.
1. Press the PROC function smart
key for Procedure Mode. The
Origin and Destination waypoint
of your active flight plan are
shown.
2. Press the Depart menu item
smart key to select the Departure
procedure. If available, select
the departure runway (with the
Small knob or the menu item keys).
3. Turn the Large knob to move between fields and turn the Small knob to
select the transition. Press Menu/Enter to accept the procedure.
4. Press the BACK function smart key to return to the Procedures mode.
Depending on the procedure for your destination, press the Destination
Arrival or Appch menu item
smart key.
5. Choose the transition and the
runway by moving to a selection
with the Large knob and listing
the choices with the Small knob.
Press Menu/Enter to accept the
transition.
6. If desired, select an alternate airport by pressing the Alternate Select
menu item key.
7. Press EXEC to activate the procedures for your flight plan.
Perform a RAIM Prediction
RAIM prediction predicts if GPS coverage is available for any waypoint. This is
used when WAAS satellites are not available.
1. Highlight a waypoint in the active flight plan or select a waypoint from
the database. Press INFO and then press the RAIM function smart key
when it is shown.
2. Press the CRSR knob in. One
of the fields will be highlighted.
Change the values of the Arrival
Date and/or Arrival Time (in UTC
time) with the Small knob while
moving to a value with the Large
knob. The default calculation
is the ETA to the last waypoint
in the active flight plan. When
selecting a waypoint from the database other than one in the active flight
plan, the default calculation is the ETA from the present position to the
waypoint.
3. After setting the values, press the Menu/Enter key to compute the RAIM
prediction.
PROCEDURES (PROC)
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Garmin GNS 480 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Garmin GNS 480 in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info