718567
14
Zoom out
Zoom in
Previous page
1/156
Next page
Cleaning the drip tray
1 Pull the drip tray out of the machine (Fig. 25).
2 Empty and rinse the drip tray under the tap.
3 Slide the drip tray back into the machine.
Cleaning the classic milk frother (specic types only)
Note: After brewing milk-based beverages clean the classic milk frother.
1 Remove the tube of the classic milk frother (Fig. 26).
2 Rinse it with fresh water (Fig. 27).
3 Remove the plastic handle of the classic milk frother from the steam wand and rinse it with fresh
water (Fig. 28).
4 Clean the steam wand with a wet cloth.
5 Slide the plastic handle back onto the steam wand.
6 Slide the tube back onto the steam wand.
Cleaning the pressurized lter holder
1 Remove the ground coee lter or coee pod lter from the lter holder and rinse it thoroughly
with hot water.
2 If present, remove the pod lter adapter from the lter holder and rinse it thoroughly with hot
water.
3 Rinse the inside and outside of the pressurized lter holder with hot water (Fig. 14).
Caution: Do not clean the pressurized lter holder in the dishwasher. This will damage the
pressurized lter holder.
Descaling
Please use Gaggia descaler only. Under no circumstances should you use a descaler based on
sulfuric acid, hydrochloric acid, sulfamic or acetic acid (vinegar) as this may damage the water circuit
in your machine and not dissolve the limescale properly. Not using the Gaggia descaler will void your
warranty. Failure to descale the appliance will also void your warranty.
Descaling procedure
1 Insert the pressurized lter holder in the brew unit.
2 Remove and empty the water tank.
3 Pour half of the descaling solution into the water tank. Fill the water tank with fresh water up to the
MAX indication. Place the water tank back into the machine.
4 Set the main switch to 'I' to switch on the machine. Turn the selection knob to the standby position.
5 Place a container under the classic milk frother.
6 Wait until the coee ready light lights up and brew two cups (of approx. 150ml each) of water.
7 Set the main switch to 'O' to switch o the machine.
8 Let the descaling solution work for 15-20 minutes with the machine switched o.
9 Set the main switch to 'I' to switch the machine back on.
10 Fill two cups (of approx. 150ml each) with hot water from the classic milk frother.
11 Set the main switch to 'O' to switch o the machine and wait 3 minutes.
14
English
Gaggia Viva WEU_export_30029_72.indd 14 21/12/2018 10:55:48
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggia Viva de Luxe - RI8435 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggia Viva de Luxe - RI8435 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian as an attachment in your email.

The manual is 3,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info