3592
39
Zoom out
Zoom in
Previous page
1/132
Next page
ENGLISH
• 39 •
manufacturer.
In the programming mode, press
or
to select the function:
FACTOR. SETTINGS
and then enable it by pressing “ENT”. At this
point the machine will display:
FACTOR. SETTINGS
NO
Choose whether to restore the factory settings
by pressing
or
and then press “ENT”
to confirm your choice.
Important: when the factory-set
default parameters are restored, all
custom settings made in the machine will
be lost.
13 LEGAL INFORMATION
This instruction book contains the information
you need in order to use and care for your
appliance correctly.
The information should be viewed as a
guideline for using and maintaining your
coffee machine in safety. The information is
not exhaustive. For additional information or
for information on topics not covered or
inadequately covered in this instruction book,
please contact an authorized service centre
or the manufacturer directly.
In addition, it should be noted that these
instructions do not form part of a previous or
existing agreement, legal contract or similar
and that the information is not changed by
any other document.
All the manufacturer’s obligations and
liabilities are based on the contract of sale,
which also specifies all the warranty terms and
conditions.
The warranty terms and conditions are neither
limited nor extended on the basis of this
instruction book.
This instruction book contains information
protected by copyright.
This instruction book may not be photocopied
or translated into other languages without
the explicit written consent of the
manufacturer.
14 SCRAPPING
Appliances no longer in use should be
rendered unusable.
Detach the plug from the wall outlet and cut
the electric cord.
Deliver scrapped appliances to a suitable
waste disposal facility.
15 DISPLAY INDICATIONS
The display guides users and helps them to use the
machine properly.
Below is a description of alarm messages that
disable the brew unit and an explanation of what
the user must do in order to use the machine
properly.
ENERGY
SAVING
Press the button (27).
DESCALING
READY FOR USE
Descale the machine (see Chap.11)
FILL WATERTANK
Fill the water tank (9) with fresh drinking water.
COF. BEANS EMPTY
READY FOR USE
Fill the coffee bean container with coffee beans
and restart the coffee brewing cycle.
DREGDRAWER FULL
Remove the dregs drawer (10) and empty the
used coffee grounds into a suitable container.
Important note: the dregs drawer
may be emptied only when the
machine is on. The drawer must be taken
39

Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggia Syncrony Digital at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggia Syncrony Digital in the language / languages: Dutch as an attachment in your email.

The manual is 3,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info