Manual Fuxtec FX-FSR152 (page 50 of 116) (English, German, French, Italian)

781736

Zoom out

Zoom in

1/116

Original Bedienungsanleitung FUXTEC FX-FSR152_de_en_fr_ita_rev07

TRIMMING AROUND TREES

Trim around logs with a slow approach; the thread should not collide with the log. Walk

around the tree from left to right. Approach grass or weeds with the tip of the thread.

33. Replacing the nylon thread

1) Switch off the engine

2) Place the trimmer on the ground so that the drive axle with the coil is exposed and

remove the nylon head

3) Take a 3mm thread and a length of 285mm. Please do not use a longer thread, as

this may affect the cutting performance.

4) Push the thread with force into the hole of the thread spool until it comes out at the

other side

5) Let the thread protrude approx. 150-160mm at both ends

6) If the thread is too short, simply pull it out with force and fill the thread head with a

longer thread

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-FSR152 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 3,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fuxtec FX-FSR152 Manual

Product: