522177
2
Zoom out
Zoom in
Previous page
1/5
Next page
2010 Version 1.0
Installation
Before any wiring and installation is performed, FUSION recommends you rst plan the complete installation. Look
at wiring routing, amplier location and mounting options. Please re-check the installation at completion.
Appropriate mounting is very important for prolonged life expectancy of any amplier.
Select a location that allows enough space for sucient airow to be maintained. Excessive heat will shorten the
ampliers life. To maximize heat dissipation, be sure to leave at least 2.5 inches of clearance around the amplier.
Installation Warning
1: Ensure the marine vessels +12V lead is removed from the battery before any equipment is connected
2: Investigate the marine vessels fuel tanks and electrical wiring locations before you begin installation
3: Ensure all wiring is protected to avoid damage
When wiring the FUSION amplier, ensure that the wires are away from sharp objects and that rubber grommets
and insulated bungs are used when routing the wiring. Ensure that when connecting the wires to the speakers
and audio system, the terminals and connections are protected from shorting to each other.
Mounting
1: Remove the 6 cover plate screws
2: Align the amplier into the position required and mark the mounting holes
3: Pre Drill the mounting holes
4: Screw the amplier into position using the screws provided
5: Complete the amplier set-up
6: Screw the cover plate into place
003
INSTALLATION
RECORD YOUR PRODUCT DETAILS HERE:
MODEL NUMBER DATE OF PURCHASE
AFFIX RECEIPT HERE
Contents
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pg 3
Installation Warning . . . . . . . . . . . . . . . . . . . . Pg 3
Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pg 3
Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pg 4
Control Descriptions.................... Pg 6
Specifications.......................... Pg 7
www.busse-yachtshop.de | info@busse-yachtshop.de
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fusion MS-AM702 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fusion MS-AM702 in the language / languages: English as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info