617171
45
Zoom out
Zoom in
Previous page
1/72
Next page
Security functions
Conguring password protection in BIOS Setup Utility
Before using the various options for password protection in the BIOS Setup utility
to increase da ta security, please observe the following:
Make a note of the passwords and keep them in a safe place. If you forget your
supervisor password you will not be able to access your notebook. Passwords are
not covered by your warranty and a charge will be made for assistance.
Password protection
Your password can be up to eig
ht characters long and contain letters and numbers.
No distinction is made betwe
en uppercase and lowercase.
Protecting BIOS Setup Utility (supervisor and user password)
If you have opened these operating instructions on the screen, w e recommend that
you print out the following instruction s. Because you cannot call the instructions
onto the screen while you are setting up the password.
BIOSSetupUtility
You prevent unauthorised use of the BIOS Setup Utility with both the supervisor and the u ser
password. The supervisor password gives you access to all functions o f the BIOS Setup
Utility, while the user password on ly provides some of the functions. You can only set a
user password if a supervisor password has already been assigned.
Please refer to the ""Se ttings in BIOS Setup Utility", Page 49 se ction for a
description of how to call up and operat e the BIOS S etu p Utility.
Setting supervisor and user password
Start the BIOS Setup Utility and go to the Se curity menu.
Select the Set Supervisor Password eld and press the En ter key.
With Enter new Password: you are asked to enter a password.
Enter the password and press the Enter key.
Conrm new Password requires you to conrm the password .
Enter the password again and press the Enter key.
Changes have been saved is a conrmation that the new password has been saved.
To set the user password, select Set User Passw ord and proceed exactly as
when conguring the supervisor password.
If you do not want to make any othe r settings, you can exit BIOS Setup Utility.
Select the Save Changes and Exit option in the Exit menu.
Select Yes and press the Enter key.
Pass
word
Supe
rvisorpassword
User
password
The notebook is rebooted and the new password is effective. If you now want to open
the BIOS Setup Utili ty,youmustrst enter your supervisor or user password. Please note
that the user password only provides access to a few of the B IOS settings.
10600900868, edition 1 35
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fujitsu Siemens AMILO Li2735 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fujitsu Siemens AMILO Li2735 in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fujitsu Siemens AMILO Li2735

Fujitsu Siemens AMILO Li2735 User Manual - Dutch - 73 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info